MMaterialsgateNEWS 2015/12/02

Related MaterialsgateCARDS

Researchers from Deakin and Drexel develop super-absorbent material to soak up oil spills

In hopes of limiting the disastrous environmental effects of massive oil spills, materials scientists from Drexel University and Deakin University, in Australia, have teamed up to manufacture and test a new material, called a boron nitride nanosheet, that can absorb up to 33 times its weight in oils and organic solvents--a trait that could make it an important technology for quickly mitigating these costly accidents.

The material, which literally absorbs the oil like a sponge, is the result of support from the Australian Research Council and is now ready to be tested by industry after two years of refinement in the laboratory at Deakin's Institute for Frontier Materials (IFM).

Alfred Deakin Professor Ying (Ian) Chen, PhD, the lead author of a paper, recently published in Nature Communications, said the material is the most exciting advancement in oil spill remediation technology in decades.

"Oil spills are a global problem and wreak havoc on our aquatic ecosystems, not to mention cost billions of dollars in damage," Chen said. "Everyone remembers the Gulf Coast disaster, but here in Australia they are a regular problem, and not just in our waters. Oil spills from trucks and other vehicles can close freeways for an entire day, again amounting to large economic losses," Chen said.

The Australian Research Council supported the development of the boron nitride nanosheets, because, according to Chen, current methods of cleaning up oil spills are inefficient and unsophisticated--taking too long and causing ongoing and expensive damage.

The nanosheet is made up of flakes, which are just several nanometers (one billionth of a meter) in thickness with tiny holes. This form enables the nanosheet to, in effect, increase its surface area per gram to the size of five and a half tennis courts.

According to lead author, Weiwei Lei, PhD, an IFM scientist and an Australian Research Council Discovery Early Career Research Awardee, turning the powder into a sponge was a big challenge--but an essential step in the process.

"In 2013 we developed the first stage of the material, but it was simply a powder. This powder had absorption capabilities, but you cannot simply throw powder onto oil - you need to be able to bind that powder into a sponge so that we can soak the oil up, and also separate it from water," Wei said. "The pores in the nanosheets provide the surface area to absorb oils and organic solvents up to 33 times its own weight."

Researchers from Drexel's College of Engineering helped to study and functionalize the material, which started as boron nitride powder, commonly called "white graphite." By forming the powder in to atomically thin sheets, the material could be made into a sponge.

"The mechanochemical technique developed meant it was possible to produce high-concentration stable aqueous colloidal solutions of boron nitride sheets, which could then be transformed into the ultralight porous aerogels and membranes for oil clean-up," said Vadym Mochalin, PhD, a co-author of the paper, who was a research associate professor at Drexel while working on the project, and is now an associate professor at Missouri University of Science and Technology.

The Drexel team used computational modeling to help understand the intimate details of how the material was formed. In the process, the team learned that the boron nitride nanosheets are flame resistant--which means they could also find applications in electrical and heat insulation.

"We are delighted that support from the Australian Research Council allowed us to participate in this interesting study and we could help our IFM colleagues to model and better understand this wonderful material, " said Yury Gogotsi, PhD, Distinguished University and Trustee Chair professor in Drexel's College of Engineering, and director of the A.J. Drexel Nanomaterials Institute.

The nanotechnology team at Deakin's Institute for Frontier Materials has been working on boron nitride nanomaterials for two decades and has been internationally recognized for its work in the development of boron nitride nanotubes and nanosheets. This project is the next step in the IFM's continued research to discover new uses for the material.

"We are so excited to have finally got to this stage after two years of trying to work out how to turn what we knew was a good material into something that could be practically used," Chen said.

Source: Drexel University – 30.11.1015.

Investigated and edited by:

Dr.-Ing. Christoph Konetschny, Inhaber und Gründer von Materialsgate
Büro für Material- und Technologieberatung
The investigation and editing of this document was performed with best care and attention.
For the accuracy, validity, availability and applicability of the given information, we take no liability.
Please discuss the suitability concerning your specific application with the experts of the named company or organization.

You want additional material or technology investigations concerning this subject?

Materialsgate is leading in material consulting and material investigation.
Feel free to use our established consulting services

MMore on this topic

Nano-coated mesh could clean oil spills for less than $1 per square foot

The unassuming piece of stainless steel mesh in a lab at The Ohio State University doesn't look like a very big deal, but it could make a big difference for future environmental cleanups. Water passes through the mesh but oil doesn't, thanks to a nearly invisible oil-repelling coating on its surface. In tests, researchers mixed water with oil and poured the mixture onto the mesh. The water filtered through the mesh to land in a beaker below. The oil collected on top of the mesh, and rolled off easily into a separate beaker when the mesh was tilted. The mesh coating is among a suite of nature-inspired nanotechnologies under development at Ohio State and described in two papers... more read more

Cleaning up oil spills and metal contaminates in a low-impact, sustainable and inexpensive manner remains a challenge for companies and governments globally.

But a group of researchers at the University of Wisconsin–Madison is examining alternative materials that can be modified to absorb oil and chemicals without absorbing water. If further developed, the technology may offer a cheaper and "greener" method to absorb oil and heavy metals from water and other surfaces. Shaoqin "Sarah" Gong, a researcher at the Wisconsin Institute for Discovery (WID) and associate professor of biomedical engineering, graduate student Qifeng Zheng, and Zhiyong Cai, a project leader at the USDA Forest Products Laboratory in Madison, have recently created and patented the new aerogel technology. Aerogels, which are highly porous materials and... more read more

In an advance toward stain-proof, spill-proof clothing, protective garments and other products that shrug off virtually every liquid — from blood and ketchup to concentrated acids — scientists are reporting development of new "superomniphobic" surfaces.

Their report on surfaces that display extreme repellency to two families of liquids — Newtonian and non-Newtonian liquids — appears in the Journal of the American Chemical Society. Anish Tuteja and colleagues point out that scientists have previously reported "omniphobic" surfaces, the term meaning that such surfaces can cause a range of different liquids to bead up and not spread on them. But typically very low surface tension liquids such as some oils and alcohols can adhere to those surfaces. Further, scientists have mostly focused on making surfaces that repel only one of the two families of liquids — Newtonian liquids, named for the great English scientist who described... more read more

Scientists are describing what may be a "complete solution" to cleaning up oil spills — a superabsorbent material that sops up 40 times its own weight in oil and then can be shipped to an oil refinery and processed to recover the oil. Their article on the material appears in ACS' journal Energy & Fuels.

T. C. Mike Chung and Xuepei Yuan point out that current methods for coping with oil spills like the 2010 Deepwater Horizon disaster are low-tech, decades-old and have many disadvantages. Corncobs, straw and other absorbents, for instance, can hold only about 5 times their own weight and pick up water, as well as oil. Those materials then become industrial waste that must be disposed of in special landfills or burned. Their solution is a polymer material that transforms an oil spill into a soft, solid oil-containing gel. One pound of the material can recover about 5 gallons of crude oil. The gel is strong enough to be collected and transported. Then, it can be converted to a liquid and refined... more read more

MaterialsgateNEWSLETTER

Partner of the Week

Search in MaterialsgateNEWS

Books and products

MaterialsgateFAIR:
LET YOURSELF BE INSPIRED