MMaterialsgateNEWS 2014/01/07

Related MaterialsgateCARDS

Electronics: Novel exfoliation method paves the way for two-dimensional materials

Versatility of new technique shows promise as new benchmark in exfoliation chemistry of two-dimensional chalcogenides

A team of scientists from the National University of Singapore (NUS) has successfully developed a method to chemically exfoliate molybdenum disulfide crystals, a class of chalcogenide compounds, into high quality monolayer flakes, with higher yield and larger flake size than current methods. The exfoliated flakes can be made into a printable solution, which can be applied in printable photonics and electronics.

This breakthrough, led by Professor Loh Kian Ping, who heads the Department of Chemistry at the NUS Faculty of Science, and is also a principal investigator with the Graphene Research Centre at the Faculty, has generic applicability to other two-dimensional chalcogenides, such as tungsten diselenide and titanium disulfide, and results in high yield exfoliation for all of these two-dimensional materials.

The NUS team collaborated with scientists from the Ulsan National Institute of Science and Technology in Korea, and the findings were first published online in prestigious scientific journal Nature Communications on 2 January 2014.

Demand for high efficiency exfoliation method

Transition metal dichalcogenides, formed by a combination of chalcogens, such as sulphur or selenium, and transition metals, such as molybdenum or tungsten, have recently attracted great attention as the next generation of two-dimensional materials due to their unique electronic and optical properties, for applications in optoelectronic devices such as thin film solars, photodetectors flexible logic circuits and sensors.

However, current processes of producing printable single layer chalcogenides take a long time and the yield is poor. The flakes produced are of submicron sizes, which make it challenging to isolate a single sheet for making electronic devices.

As most applications require clean and large-sized flakes, this pinpoints a clear need to explore new ways to make high quality single-layer transition metal dichalcogenides with high yield.

Breakthrough in production

To address the production bottleneck, the NUS team explored the metal adducts of naphthalene. They prepared naphthalenide adducts of lithium, sodium and potassium, and compared the exfoliation efficiency and quality of molybdenum disulfide generated. The processing steps are detailed in the Annex.

Using a two-step expansion and intercalation method, the researchers were able to produce high quality single-layer molybdenum disulfide sheets with unprecedentedly large flake size.

The researchers also demonstrated that the exfoliated molybdenum disulfide flakes can be made into a printable solution, and wafer-size films can be printed, as the good dispersion and high viscosity of the flakes render it highly suitable for inkjet printing.

In a comparative analysis, Dr Zheng Jian, the first author of the paper, who is also a Research Fellow with the Department of Chemistry at NUS Faculty of Science, found that the alkali metal naphthalenide intercalation method applied possesses significant advantages in comparison to the conventional method.

Commenting on the significance of the findings, Prof Loh said, “At present, there is a bottleneck in the development of solution-processed two dimensional chalcogenides. Our team has developed an alternative exfoliating agent using the organic salts of naphthalene and this new method is more efficient than previous solution-based methods. It can also be applied to other classes of two-dimensional chalcogenides.”

“Considering the versatility of this method, it may be adopted as the new benchmark in exfoliation chemistry of two-dimensional chalcogenides,” he added.

Further research into printable devices

The fast growing field of printed photonics, electronics and optoelectronics demands high material quality, precise material deposition, and application-specific optical, electrical, chemical, and mechanical properties.

To further their research and to cater to the industry, Prof Loh and his team will be looking at developing inks based on different types of two-dimensional chalcogenides exfoliated by their novel method so as to produce printable optoelectronic devices. They will also be testing the optical non-linear properties of the flakes they have produced.

Source: National University of Singapore – 02.01.2014.

Investigated and edited by:

Dr.-Ing. Christoph Konetschny, Inhaber und Gründer von Materialsgate
Büro für Material- und Technologieberatung
The investigation and editing of this document was performed with best care and attention.
For the accuracy, validity, availability and applicability of the given information, we take no liability.
Please discuss the suitability concerning your specific application with the experts of the named company or organization.

You want additional material or technology investigations concerning this subject?

Materialsgate is leading in material consulting and material investigation.
Feel free to use our established consulting services

MMore on this topic

Scientists have created a powerful micro-supercapacitor, just nanometres thick, that could help electronics companies develop mobile phones and cameras that are smaller, lighter and thinner than ever before. The tiny power supply measures less than half a centimetre across and is made from a flexible material, opening up the possibility for wearable electronics.

The research is published in the Royal Society of Chemistry journal Energy & Environmental Science. A bottleneck in making portable electronic devices like mobile phones even smaller is reducing the size and increasing the flexibility of the power supplies in electronic circuits. Supercapacitors are attractive power supplies because they can store almost as much energy as a battery, with the advantage of high-speed energy discharge. Supercapacitor electrodes are normally made from carbon or conducting polymers, but these can be relatively costly. A team led by Professor Oliver G Schmidt at the Leibniz Institute for Solid State and Materials Research in Dresden (IFW-Dresden) examined... more read more

Networks of spherical nanoparticles embedded in elastic materials may make the best stretchy conductors yet, engineering researchers at the University of Michigan have discovered.

Flexible electronics have a wide variety of possibilities, from bendable displays and batteries to medical implants that move with the body. "Essentially the new nanoparticle materials behave as elastic metals," said Nicholas Kotov, the Joseph B. and Florence V. Cejka Professor of Engineering. "It's just the start of a new family of materials that can be made from a large variety of nanoparticles for a wide range of applications." Finding good conductors that still work when pulled to twice their length is a tall order—researchers have tried wires in tortuous zigzag or spring-like patterns, liquid metals, nanowire networks and more. The team was surprised that... more read more

Applying diamond coatings at lower temperatures expands options for electronic devices

A new method for creating thin films of diamonds, which is described in the journal Applied Physics Letters, produced by AIP Publishing, may allow manufacturers to enhance future electronics. In industrial and high-tech settings, diamonds are particularly valued for their hardness, optical clarity, smoothness, and resistance to chemicals, radiation and electrical fields. For electronics applications, researchers "dope" diamonds in order to make them conductive, introducing the semiconductor boron into the diamond manufacturing process. In the past, it has been a challenge to imbue electronic devices with diamond-like qualities by applying a doped diamond coating, or thin film because... more read more

Rice, Oak Ridge labs make semiconducting films for atom-thick circuits

Scientists at Rice University and Oak Ridge National Laboratory (ORNL) have advanced on the goal of two-dimensional electronics with a method to control the growth of uniform atomic layers of molybdenum disulfide (MDS). MDS, a semiconductor, is one of a trilogy of materials needed to make functioning 2-D electronic components. They may someday be the basis for the manufacture of devices so small they would be invisible to the naked eye. The work appears online this week in Nature Materials. The Rice labs of lead investigator Jun Lou, Pulickel Ajayan and Boris Yakobson, all professors in the university’s Mechanical Engineering and Materials Science Department, collaborated with Wigner... more read more


Partner of the Week

Search in MaterialsgateNEWS

Books and products