MMaterialsgateNEWS 2014/06/11

Energy: Designing Ion ‘Highway Systems’ for Batteries

Since the early 1970s, lithium has been the most popular element for batteries: it’s the lightest of all metals and has the greatest electrochemical potential.

But a lithium-based battery has a major disadvantage: it’s highly flammable, and when it overheats, it can burst into flames. For years, scientists have searched for safer battery materials that still have the same advantages as lithium. While plastics (or polymers) seemed like an obvious choice, researchers never fully understood how the material would change when an ion charge was introduced.

Now a McCormick team has married two traditional theories in materials science that can explain how the charge dictates the structure of the material. This opens the door for many applications, including a new class of batteries.

“There is a huge effort to go beyond lithium in a flammable solvent,” says Monica Olvera de la Cruz, Lawyer Taylor Professor of Materials Science and Engineering and senior author of the paper. “People have been looking at alternatives that are not explosive, like plastics. But they didn’t know how to compute what happens when you put in a charge.”

The team looked at plastics known as block copolymers (BCPs) that are two types of polymers stuck together. They are a leading material for use as ion conductors because they self-assemble into nanostructures that both enable ion charge transport and maintain structural integrity. BCPs innately have nano-channels through which the ion can travel, but the charges themselves manipulate the shape of the channels. To use the material in batteries, researchers must find a way to control the shape of the nano-channels, so that the charge moves well.

“If you can optimize the ability of the charge to move through the system, then you can optimize the power that actually comes out of the battery,” says Charles Sing, a postdoctoral fellow in Olvera de la Cruz’s lab and first author of the paper.

The problem lies in the structure of the material. BCPs are very long chains of molecules. When they are stretched out, they extend over distances much greater than the typical size of the ion charges. However, the charges still have a strong effect on the nano-channels despite being much smaller. To properly understand the dynamics of BCPs, different theories are needed for the different length scales.

To understand how the ion charge changes the structure of the BCPs’ nano-channels, Sing and Jos Zwanikken, a research assistant professor in the same lab, combined two traditional theories: the Self-Consistent Field Theory and Liquid State Theory. Self-Consistent Field Theory describes how long molecules behave.

“Liquid State Theory, on the other hand, describes how charges operate on very local, atomic levels,” Zwanikken says.

While these two theories have been studied, in-depth, for decades, no one has previously put them together. When combined, they provide a new way of looking at the nano-channel systems. The electrical charge, known as an ion, is associated with an oppositely charged molecule, known as a counter-ion, which is also present in the nano-channel. Together, these ions and counter-ions are highly attracted to each other and form a salt. These salts cluster into miniature crystals, which exert a force on the nano-channels, changing their structure.

Olvera de la Cruz and her group found that these two effects balance one another—the salts want to form mini-crystals, which forces the nano-channel to deform. This understanding makes it possible to predict and even design a “highway system” through which the ions are transported, maximizing the power of the battery.

The team hopes their finding will guide experimentalists as they test materials. It will give researchers more information about the physical concepts underlying BCP systems.

Olvera de la Cruz says, “We have provided the tools to understand these systems by including ionic-length scale effects into the polymer mesoscale morphology.”

“Electrostatic control of block copolymer morphology” appeared in the June 8 issue of Nature Materials. This work was supported by the National Science Foundation, International Institute of Nanotechnology, Air Force Office of Scientific Research, and Office of the Director of Defense Research and Engineering.

Source: Northwestern University – 09.06.2014.

Investigated and edited by:

Dr.-Ing. Christoph Konetschny, Inhaber und Gründer von Materialsgate
Büro für Material- und Technologieberatung
The investigation and editing of this document was performed with best care and attention.
For the accuracy, validity, availability and applicability of the given information, we take no liability.
Please discuss the suitability concerning your specific application with the experts of the named company or organization.

You want additional material or technology investigations concerning this subject?

Materialsgate is leading in material consulting and material investigation.
Feel free to use our established consulting services

MMore on this topic

Battery weight has long vexed engineers designing electric cars for the mass market. Bigger batteries are needed to power a car for longer distances, but their weight in turn requires the car to expend more energy.

But what if the body of the car itself was a battery? Researchers at KTH Royal Institute of Technology have found a promising solution with carbon fibre. Eric Jacques, a researcher in vehicle and aerospace engineering at KTH, says carbon fibre can fill two functions in an electric car: as a lightweight composite reinforcement material for the car’s body, and as an active electrode in lithium ion batteries. “The objective of our research was to develop a structural battery consisting of multifunctional lightweight materials that simultaneously manage mechanical loads, and store electrical energy,” says Eric Jacques, a researcher in Aeronautical and Vehicle Engineering at KTH... more read more

Researchers develop novel supercapacitor architecture that provides two times more energy and power compared to supercapacitors commercially available today

Researchers at the University of California, Riverside have developed a novel nanometer scale ruthenium oxide anchored nanocarbon graphene foam architecture that improves the performance of supercapacitors, a development that could mean faster acceleration in electric vehicles and longer battery life in portable electronics. The researchers found that supercapacitors, an energy storage device like batteries and fuel cells, based on transition metal oxide modified nanocarbon graphene foam electrode could work safely in aqueous electrolyte and deliver two times more energy and power compared to supercapacitors commercially available today. The foam electrode was successfully cycled over... more read more

Engineers use silicon dioxide to make lithium-ion batteries that last three times longer between charges compared to current standard

Using a material found in Silly Putty and surgical tubing, a group of researchers at the University of California, Riverside Bourns College of Engineering have developed a new way to make lithium-ion batteries that will last three times longer between charges compared to the current industry standard. The team created silicon dioxide (SiO2) nanotube anodes for lithium-ion batteries and found they had over three times as much energy storage capacity as the carbon-based anodes currently being used. This has significant implications for industries including electronics and electric vehicles, which are always trying to squeeze longer discharges out of batteries. “We are taking the same material... more read more

A Rice University laboratory has flexible, portable and wearable electronics in its sights with the creation of a thin film for energy storage.

Rice chemist James Tour and his colleagues have developed a flexible material with nanoporous nickel-fluoride electrodes layered around a solid electrolyte to deliver battery-like supercapacitor performance that combines the best qualities of a high-energy battery and a high-powered supercapacitor without the lithium found in commercial batteries today. The new work by the Rice lab of chemist James Tour is detailed in the Journal of the American Chemical Society. Their electrochemical capacitor is about a hundredth of an inch thick but can be scaled up for devices either by increasing the size or adding layers, said Rice postdoctoral researcher Yang Yang, co-lead author of the paper with... more read more


Partner of the Week

Search in MaterialsgateNEWS