MMaterialsgateNEWS 2013/08/12

Related MaterialsgateCARDS

Bubbles are the new lenses for nanoscale light beams

Bending light beams to your whim sounds like a job for a wizard or an a complex array of bulky mirrors, lenses and prisms, but a few tiny liquid bubbles may be all that is necessary to open the doors for next-generation, high-speed circuits and displays, according to Penn State researchers.

To combine the speed of optical communication with the portability of electronic circuitry, researchers use nanoplasmonics -- devices that use short electromagnetic waves to modulate light on the nanometer scale, where conventional optics do not work. However, aiming and focusing this modulated light beam at desired targets is difficult.

"There are different solid-state devices to control (light beams), to switch them or modulate them, but the tenability and reconfigurability are very limited," said Tony Jun Huang, associate professor of engineering science and mechanics. "Using a bubble has a lot of advantages."

The main advantage of a bubble lens is just how quickly and easily researchers can reconfigure the bubble's location, size, and shape -- all of which affect the direction and focus of any light beam passing through it.

Huang's team created separate simulations of the light beams and bubble lens to predict their behaviors and optimize conditions before combining the two in the laboratory. They published their findings in Nature Communications.

To form the bubble lens, researchers used a low-intensity laser to heat water on a gold surface. The tiny bubble's optical behavior remains consistent as long as the laser's power and the environmental temperature stay constant.

Simply moving the laser or adjusting the laser's power can change how the bubble will deflect a light beam, either as a concentrated beam at a specific target or as a dispersed wave. Changing the liquid also affects how a light beam will refract.

The materials to form bubble lenses are inexpensive, and the bubbles themselves are easy to dissolve, replace and move.

"In addition to its unprecedented reconfigurability and tenability, our bubble lens has at least one more advantage over its solid-state counterparts: its natural smoothness," said Huang. "The smoother the lens is, the better quality of the light that pass through it."

Huang believes that the next step is to find out how the bubble's shape influences the direction of the light beam and the location of its focal point. Fine control over these light beams will enable improvements for on-chip biomedical devices and super resolution imaging.

"For all these applications, you really need to precisely control light in nanoscale, and that's where this work can be a very important component," said Huang.

Source: Penn State – 09.08.2013.

Investigated and edited by:

Dr.-Ing. Christoph Konetschny, Inhaber und Gründer von Materialsgate
Büro für Material- und Technologieberatung
The investigation and editing of this document was performed with best care and attention.
For the accuracy, validity, availability and applicability of the given information, we take no liability.
Please discuss the suitability concerning your specific application with the experts of the named company or organization.

You want additional material or technology investigations concerning this subject?

Materialsgate is leading in material consulting and material investigation.
Feel free to use our established consulting services

MMore on this topic

Resilient, ultraslippery glass could lead to self-cleaning, scratch-resistant windows, lenses, and solar panels

A new transparent, bioinspired coating makes ordinary glass tough, self-cleaning and incredibly slippery, a team from the Wyss Institute for Biologically Inspired Engineering at Harvard University and Harvard School of Engineering and Applied Sciences (SEAS) reported online in the July 31 edition of Nature Communications. The new coating could be used to create durable, scratch-resistant lenses for eyeglasses, self-cleaning windows, improved solar panels and new medical diagnostic devices, said principal investigator Joanna Aizenberg, Ph.D., who is a Core Faculty Member at the Wyss Institute, Amy Smith Berylson Professor of Materials Science at SEAS, and a Professor of Chemistry and Chemical... more read more

Ulsan National Institute of Science & Technology (UNIST) has demonstrated that a live rabbit could wear contact lenses fitted with inorganic light-emitting diode with no side effects. This new class of hybrid transparent and stretchable electrode paves the way for flexible displays, solar cells, and electronics.

UNIST scientists have combined graphene with silver nanowires to form a thin, transparent and stretchable electrode which overcome the weaknesses of each individual material, resulting in a new class of electrodes with widespread possible applications including picture taking and scanning using soft contact lenses. Transparent electrodes have been widely used in things like touch screens, flat-screen TVs, solar cells and light-emitting devices. Commonly made from indium tin oxide(ITO), it is brittle and cracks thus losing functionality if flexed. It also degrades over time, and is expensive due to the limited quantities of indium metal. As an alternative, the networks of randomly distributed... more read more

A University of British Columbia engineer and a team of U.S. researchers have made a breakthrough utilizing spray-on technology that could revolutionize the way optical lenses are made and used.

Kenneth Chau, an assistant professor in the School of Engineering at UBC's Okanagan campus, is a key investigator among colleagues at the National Institute of Standards and Technology in Maryland. Their work – the development of a flat lens – is published in the May 23 issue of the journal Nature. Nearly all lenses – whether in an eye, a camera, or a microscope – are presently curved, which limits the aperture, or amount of light that enters. "The idea of a flat lens goes way back to the 1960s when a Russian physicist came up with the theory," Chau says. "The challenge is that there are no naturally occurring materials to make that type of flat lens. Through... more read more

Scientists are reporting development of a revolutionary new lens — flat, distortion-free, so small that more than 1,500 would fit across the width of a human hair — capable in the future of replacing lenses in applications ranging from cell phones to cameras to fiber-optic communication systems. The advance, which could lead to smart phones as thin as a credit card, appears in ACS' journal Nano Letters.

Federico Capasso and colleagues explain that the lenses used to focus light in eyeglasses, microscopes and other products use the same basic technology dating to the late 1200s, when spectacle lenses were introduced in Europe. Existing lenses are not thin or flat enough to remove distortions, such as spherical aberration, astigmatism and coma, which prevent the creation of a sharp image. Correction of those distortions requires complex solutions, such as multiple lenses that increase weight and take up space. To overcome these challenges, the scientists sought to develop a new superthin, flat lens. Although the new lens is ultra-thin, it has a resolving power that actually approaches the... more read more


Partner of the Week

Search in MaterialsgateNEWS

Books and products