MMaterialsgateNEWS 2018/04/12

Related MaterialsgateCARDS

Thin Engineered Material Perfectly Redirects and Reflects Sound

Credit: Junfei Li

Metamaterial device controls transmission and reflection of acoustic waves

Metamaterials researchers at Duke University have demonstrated the design and construction of a thin material that can control the redirection and reflection of sound waves with almost perfect efficiency.

While many theoretical approaches to engineer such a device have been proposed, they have struggled to simultaneously control both the transmission and reflection of sound in exactly the desired manner, and none have been experimentally demonstrated.

The new design is the first to demonstrate complete, near-perfect control of sound waves and is quickly and easily fabricated using 3-D printers. The results appear online April 9 in Nature Communications.

“Controlling the transmission and reflection of sound waves this way was a theoretical concept that did not have a path to implementation—nobody knew how to design a practical structure using these ideas,” said Steve Cummer, professor of electrical and computer engineering at Duke. “We solved both of those problems. Not only did we figure out a way to design such a device, we could also make one and test it. And lo and behold, it actually works.”

The new design uses a class of materials called metamaterials—artificial materials that manipulate waves like light and sound through their structure rather than their chemistry. For example, while this particular metamaterial is made out of 3-D printed plastic, it’s not the properties of the plastic that are important—it’s the shapes of the device’s features that allow it to manipulate sound waves.

The metamaterial is made of a series of rows of four hollow columns. Each column is nearly one-half of an inch on a side with a narrow opening cut down the middle of one side, making it look somewhat like the world’s deepest Ethernet port. While the device demonstrated in the paper is 1.6 inches tall and nearly 3.5 feet long, its height and width are irrelevant—it could theoretically stretch on forever in either direction.

The researchers control how the device manipulates sound through the width of the channels between each row of columns and the size of the cavity inside each individual column. Some columns are wide open while others are nearly closed off.

To understand why, think of someone blowing air across the top of a glass bottle—the pitch the bottle makes depends on the amount of liquid left inside the bottle. Similarly, each column resonates at a different frequency depending on how much of it is filled in with plastic.

As a sound wave travels through the device, each cavity resonates at its prescribed frequency. This vibration not only affects the speed of the sound wave but interacts with its neighboring cavities to tame both transmission and reflection.

“Previous devices could shape and redirect sound waves by changing the speed of different sections of the wave front, but there was always unwanted scattering,” said Junfei Li, a doctoral student in Cummer’s laboratory and first author of the paper. “You have to control both the phase and amplitude of both the transmission and reflection of the wave to approach perfect efficiencies.”

To make matters more complicated, the vibrating columns not only interact with the sound wave, but also with their surrounding columns. Li needed to write an ‘evolutionary computer optimization program,’ to work through all the design permutations.

The researchers feed the program the boundary conditions needed on each side of the material to dictate how they want the outgoing and reflected waves to behave. After trying a random set of design solutions, the program mixes various combinations of the best solutions, introduces random “mutations,” and then runs the numbers again. After many iterations, the program eventually “evolves” a set of design parameters that provide the desired result.

In the paper, Cummer, Li and colleagues demonstrate that one such set of solutions can redirect a sound wave coming straight at the metamaterial to a sharp 60-degree outgoing angle with an efficiency of 96 percent. Previous devices would have been lucky to achieve 60 percent efficiencies under such conditions. While this particular setup was designed to control a sound wave at 3,000 Hertz—a very high pitch not dissimilar to getting a “ringing in your ears”—the metamaterials could be scaled to affect almost any wavelength of sound.

The researchers and their collaborators are next planning to transfer these ideas to the manipulation of sound waves in water for applications such as sonar, although there aren’t any ideas for applications in air. At least not yet.

“When talking about waves, I often fall back on the analogue of an optical lens,” said Cummer. “If you tried to make really thin eyeglasses using the same approaches that these sorts of devices have been using for sound, they would stink. This demonstration now allows us to manipulate sound waves extremely accurately, like a lens for sound that would be way better than previously possible.”

Source: Duke University – 10.04.2018.


“Systematic design and experimental demonstration of bianisotropic metasurfaces for scattering-free manipulation of acoustic wavefronts.” Junfei Li, Chen Shen, Ana Diaz-Rubio, Sergei A. Tretyakov and Steven A. Cummer. Nature Communications, 2018. DOI: 10.1038/s41467-018-03778-9

Investigated and edited by:

Dr.-Ing. Christoph Konetschny, Inhaber und Gründer von Materialsgate
Büro für Material- und Technologieberatung
The investigation and editing of this document was performed with best care and attention.
For the accuracy, validity, availability and applicability of the given information, we take no liability.
Please discuss the suitability concerning your specific application with the experts of the named company or organization.

You want additional material or technology investigations concerning this subject?

Materialsgate is leading in material consulting and material investigation.
Feel free to use our established consulting services

MMore on this topic

Credit: Yun Jing

Researchers from North Carolina State University and Nanjing University have developed an “ultra-thin” sound diffuser that is 10 times thinner than the widely used diffusers found in recording studios, concert venues and movie theaters to reduce echoes and improve the quality of sound.

The new design uses less material, which would reduce cost, as well as taking up far less space. In a typical room with flat walls, sound waves usually bounce off the walls, like light reflecting off a mirror. This creates echoes and overlapping sound waves that result in uneven sound quality depending on where you are in the room. “Sound diffusers are panels placed on the walls and ceiling of a room to scatter sound waves in many different directions, eliminating echoes and undesirable sound reflections – ultimately improving the quality of the sound,” says Yun Jing, an assistant professor of mechanical and aerospace engineering at NC State and corresponding author of a paper on... more read more

A group of University College London researchers have used tailored optoacoustic surface profiles to generate acoustic fields focused at multiple points using a single optical pulse

Limitations of the piezoelectric array technologies conventionally used for ultrasonics inspired a group of University College London researchers to explore an alternative mechanism for generating ultrasound via light, also known as the photoacoustic effect. Coupling this with 3-D printing, the group was able to generate sounds fields with specific shapes for potential use in biological cell manipulation and drug delivery. Piezoelectric materials generate mechanical stress in response to an applied electric field, resulting in a usable and precisely controllable force that can, for example, be used to create sound waves. But achieving this control with conventional piezoelectric arrays requires... more read more

A cheap, accessible way to add tangible interactivity to smartphone

As people find ever more inventive uses for smartphones, touchscreens sometimes fall short as control surfaces. Researchers at Carnegie Mellon University and Disney Research have developed an inexpensive alternative - a toolbox of physical knobs, sliders and other mechanisms that can be readily added to any device. The researchers drew inspiration from wind instruments in devising these mechanisms, which they call Acoustruments. The idea is to use pluggable plastic tubes and other structures to connect the smartphone's speaker with its microphone. The device can then be controlled by acoustically altering sounds as they pass through this system. Just as a simple slide whistle or flute... more read more

Layer of microscopic spheres offers new approach to controlling acoustic waves.

In some ways, granular material — such as a pile of sand — can behave much like a crystal, with its close-packed grains mimicking the precise, orderly arrangement of crystalline atoms. Now researchers at MIT have pushed that similarity to a new limit, creating two-dimensional arrays of micrograins that can funnel acoustic waves, much as specially designed crystals can control the passage of light or other waves. The researchers say the findings could lead to a new way of controlling frequencies in electronic devices such as cellphones, but with components that are only a fraction the size of those currently used for that function. On a larger scale, it could lead to new types of blast... more read more


Partner of the Week

Search in MaterialsgateNEWS

Books and products