MMaterialsgateNEWS 2017/12/11

Bionic: Brittle star shows how to make tough ceramics

A beautiful, brainless brittle star that lives in coral reefs has the clue to super tough glass. Hundreds of focal lenses are located on the arms of this creature, which is an echinoderm called Ophiocoma wendtii.

These lenses, made of chalk, are powerful and accurate, and the deciphering of their crystalline and nanoscale structure has occupied Boaz Pokroy and his team, from the Technion-Israel Institute of Technology, for the past three years. Thanks to research done on three ESRF beamlines, ID22, ID13 and ID16B, among other laboratories, they have figured out the unique protective mechanism of highly resistant lenses.

As an example, take tempered glass. It is produced by exerting compressive pressure on the glass which compresses it and leaves it more compact than in its natural state. Glass tempering is performed by rapidly heating and then rapidly cooling the material. In this process, the outside of the material cools more quickly than the inside and thereby compresses the inside. Ophiocoma wendtii lenses are created in the open sea, at room temperature, unlike tempered glass. “We have discovered a strategy for making brittle material much more durable under natural conditions. It is ‘crystal engineering’ and tempering without heating and quenching – a process that could be very useful in materials engineering”, explains Pokroy.

The formation of calcite lenses was discovered thanks to a long series of experiments at the ESRF and the Titan transmission electron microscope at the Technion. “When we first came to the ESRF we didn't expect our research to reach these results”, says Pokroy. The team came first to ID22, where they used powder X-ray diffraction to look into the material in a powder form while heating it. “We understood that we had nanodomains after this experiment, so we did some transmission electron microscopy at home, then came to ID13 to map the nanodomains and finally to ID16 to do tomography on how the different particles arrange themselves in different layers”, he adds.

The team, which includes scientists from the University of Wisconsin (US), the Natural History Museum of Los Angeles county (US), the University of Trento (Italy) and the Charité Hospital in Berlin (Germany), discovered that the crucial stage in the process of lens formation is the transition from the amorphous phase – the phase between liquid and solid – to the crystalline phase. At this stage, calcite nanoparticles, which are rich in magnesium and characterized by a relatively low density, separate from the rest of the material. The difference in concentration of magnesium in the calcite particles causes various degrees of hardness, density, and pressure in different regions of the material. Magnesium-rich particles press on the inner part of the lens as it crystallizes and “temper” it into a clear and tough crystalline material. “Nature exhibits tremendous creativity in improving the organism’s abilities in various contexts such as strength, sensing, and self-defense. Here, too, in the process of creating hardy and precise transparent lenses, we see tremendous efficiency in the use of existing raw materials under conditions in the natural environment”.

Engineers now can use this newly discovered biostrategy in toughening and strengthening synthetic ceramic materials in various applications that span from optical lenses to automotive turbochargers and even biomaterial implants.

Source: European Synchrotron Radiation Facility – 07.12.2017.


Polischuk, I. et al, Science 08 Dec 2017: Vol. 358, Issue 6368, pp. 1294-1298. DOI: 10.1126/science.aaj2156

Investigated and edited by:

Dr.-Ing. Christoph Konetschny, Inhaber und Gründer von Materialsgate
Büro für Material- und Technologieberatung
The investigation and editing of this document was performed with best care and attention.
For the accuracy, validity, availability and applicability of the given information, we take no liability.
Please discuss the suitability concerning your specific application with the experts of the named company or organization.

You want additional material or technology investigations concerning this subject?

Materialsgate is leading in material consulting and material investigation.
Feel free to use our established consulting services

MMore on this topic

Robots perform many tasks that humans can’t or don't want to perform, getting around on intricately designed wheels and limbs. If they tip over, however, they are rendered almost useless.

A team of University of Illinois mechanical engineers and entomologists are looking to click beetles, who can right themselves without the use of their legs, to solve this robotics challenge. The researchers presented their findings at Living Machines 2017: The 6th International Conference on Biomimetic and Biohybrid Systems at Stanford University, and later won second place in a student and faculty research competition at the international BIOMinnovate Challenge, in Paris, France – a research expo that showcases biologically-inspired design in engineering, medicine and architecture. “This idea came to life when a group of insect physiology students decided to take a closer look at... more read more


Partner of the Week

Search in MaterialsgateNEWS

Books and products