MMaterialsgateNEWS 2018/05/11

A faster way to make drug microparticles

Credit: University of Pennsylvania

Pharmaceuticals owe their effects mostly to their chemical composition, but the packaging of these drugs into specific physical formulations also needs to be done to exact specifications.

For example, many drugs are encapsulated in solid microparticles, the size and shape of which determine the timing of the drug’s release and its delivery to specific parts of the body.

When engineering these drug microparticles, consistency is key, but common drug manufacturing techniques, such as spray drying and ball milling, produce uneven results. The ideal method involves microfluidics, a kind of liquid assembly line that drips out perfectly sized microparticles one at a time.

Now, University of Pennsylvania engineers have developed a microfluidic system where more than 10,000 of these devices run in parallel, all on a silicon-and-glass chip that can fit into a shirt pocket.

Scaling up microfluidic systems has been a major challenge, as they depend on tightly controlled flow rates to produce particles of a consistent size. The Penn team’s innovation is new fluidic architecture, built with the technology used to manufacture computer chips and resulting in a system that can manufacture these drug particles a thousand times faster than ever before.

The team, led by David Issadore, assistant professor in the School of Engineering and Applied Science’s Department of Bioengineering, and Sagar Yadavali, a postdoctoral researcher in Issadore’s lab, outlined the design of their system in the journal Nature Communications. Daeyeon Lee, professor in the Department of Chemical and Biomolecular Engineering, and Heon-Ho Jeong, then a graduate student in Lee’s lab, contributed to the study.

The Penn team is currently testing its system with David Lai, a research investigator at GlaxoSmithKline.

Current pharmaceutical microparticle manufacturing techniques involve spraying them in liquid form from a nozzle and letting them dry, or milling larger solid particles down in a tumbler. However, since the microparticles are being made en masse, there can be significant variations in their size and shape.

These manufacturing problems mean that an enormous amount of time and money is spent on size reductions,” Yadavali says. “That leads to higher costs.”

Microfluidics provides a potential solution to these problems. By synthesizing the drugs in a network of microscopic channels and chambers, surface tension and drag forces can be finely tuned to generate particles of a consistent size and shape. However, there are intrinsic limitations to how fast these microscale devices can work.

“The bottleneck for increasing the throughput of microfluidics is a fundamental physics problem,” Issadore says. “We cannot run the individual microfluidic devices faster than any other lab, because the microfluidic phenomenon that enables the drug microparticles to be precisely fabricated stops working above a critical flow rate; they go from making bubbles to making unstable jets.”

Typical flow rates are a milliliter per hour, far too slow to be of use in an industrial setting. Since increasing the flow rate is not an option, the only way to scale up production is to increase the number of devices.

Previous attempts at large-scale parallelization struggled with another trade-off. In order to distribute flow evenly to all of the devices on the chip, each individual device must have a large pressure drop across it relative to the pressure drop along the delivery channels that feed it. This results in each device running slower than they would if they were fed individually.

The Penn researchers solved this problem by separating the devices into one component that provides the required pressure drop and another downstream that makes the particles. This allows many devices to be incorporated in parallel without having an effect on the throughput of each one.

“By incorporating high-aspect-ratio flow resistors upstream of each device,” Yadavali says, “we can decouple individual droplet design from the system-level design, which allows us to incorporate any type of microfluidic particle generator we want and as many as we can fit onto a chip.”

Using lithography to simultaneously etch 10,260 devices into a four-inch silicon wafer, sandwiching it between two glass plates to make hollow channels, and hooking up its single sets of inlets and outlets, the Penn team’s system produces an effective flow rate than is more than 10,000 times faster than what can be typically achieved in a microfluidic device.

The Penn team first tested its system by making simple oil-in-water droplets, at a rate of more than 1 trillion droplets per hour. To demonstrate it with materials more relevant to drug manufacturing, they also made biocompatible microparticles out of polycaprolactone, at a rate of about 328 billion particles per hour.

“Drugs can be mixed into polycaprolactone microparticles,” Sagar says, “so that controlled amounts of drug can be gradually released as the particle dissolves. The rate that the drug leaves the particle is dependent on the particle size, which is why having a consistent size is so important.”

The researchers mixed the polycaprolactone with water as a proof-of-concept; testing on a real drug would have been prohibitively expensive given their system’s rate of production.

“We at GSK,” Lai says, “are delighted to be part of a research collaboration with Daeyeon and David’s research groups. Congratulations on an exquisite and impactful publication.”

The researcher’s microfluidic system is currently capable of this kind of simple drug packaging, but other, more complicated manufacturing techniques are possible.

“We are now working to implement additional microfluidic operations onto our chip,” Issadore, “including miniaturized versions of solvent extraction, crystallization, and other traditional chemical-engineering processes. By bringing more of the operations necessary to formulate the drug onto our chip, precise 'designer' microparticle drug formulations can be produced at an industrial scale.”

Source: University of Pennsylvania – 04.05.2018.

Investigated and edited by:

Dr.-Ing. Christoph Konetschny, Inhaber und Gründer von Materialsgate
Büro für Material- und Technologieberatung
The investigation and editing of this document was performed with best care and attention.
For the accuracy, validity, availability and applicability of the given information, we take no liability.
Please discuss the suitability concerning your specific application with the experts of the named company or organization.

You want additional material or technology investigations concerning this subject?

Materialsgate is leading in material consulting and material investigation.
Feel free to use our established consulting services

MMore on this topic

Precisely ordered biomaterials could be used for drug delivery, tissue engineering and wound-healing

Biomedical engineers from Duke University have demonstrated a new approach to making self-assembled biomaterials that relies on protein modifications and temperature. The hybrid approach allows researchers to control self-assembly more precisely, which may prove useful for a variety of biomedical applications from drug delivery to wound healing. Biomaterials have broad applications across the fields of tissue engineering, regenerative medicine and drug delivery. Protein- and peptide-based materials are attractive for these applications because they are non-toxic, biodegradable and have a well-defined composition. But these biomaterials are limited to the 20 amino acids found in nature... more read more

A team of chemical engineers at The University of Texas at Austin has developed a new, cost-effective method for synthetically producing a biorenewable platform chemical called triacetic acid lactone (TAL) that can be used to produce innovative new drugs and sustainable plastics at an industrial scale, as described this week in Proceedings of the National Academy of Sciences.

Led by Hal Alper, professor in the McKetta Department of Chemical Engineering in the Cockrell School of Engineering, the team’s new method involves engineering the yeast Y. lipolytica to increase production of TAL, a polyketide, to levels that far exceed current bioproduction methods. This was accomplished by rewiring metabolism in the yeast through synthetic biology and genetic engineering. Ultimately, the research team increased production capacity tenfold, enabling polyketides to be mass-produced for incorporation into a variety of new applications in industry. Polyketides are an important class of naturally derived molecules that can be used to make many useful products such as nutritional... more read more

Researchers at the University of Copenhagen have developed a new method for the production of medicine. They print medical drugs in QR coded patterns onto an edible material.

The production can be tailored to fit each patient and has the potential to protect against wrong medication and fake medicine according to the researchers. For the last 100 years, researchers have constantly pushed the boundaries for our knowledge about medicine and how different bodies can respond differently to it. However, the methods for the production of medicine have not yet moved itself away from mass production. Many who have a given illness get the same product with equal amount of an active compound. This production might soon be in the past. In a new study, researchers from the University of Copenhagen together with colleagues from Åbo Akademi University in Finland have developed... more read more

University of British Columbia researchers have developed a magnetic drug implant--the first of its kind in Canada--that could offer an alternative for patients struggling with numerous pills or intravenous injections.

The device, a silicone sponge with magnetic carbonyl iron particles wrapped in a round polymer layer, measures just six millimetres in diameter. The drug is injected into the device and then surgically implanted in the area being treated. Passing a magnet over the patient's skin activates the device by deforming the sponge and triggering the release of the drug into surrounding tissue through a tiny opening. "Drug implants can be safe and effective for treating many conditions, and magnetically controlled implants are particularly interesting because you can adjust the dose after implantation by using different magnet strengths. Many other implants lack that feature," said... more read more


Partner of the Week

Search in MaterialsgateNEWS

Books and products