MMaterialNews 2012/04/30

Energy: Researchers develop a path to liquid solar cells that can be printed onto surfaces

Liquid solar cells are cheaper, more flexible than existing solar options
Scientists at USC have developed a potential pathway to cheap, stable solar cells made from nanocrystals so small they can exist as a liquid ink and be painted or printed onto clear surfaces.

The solar nanocrystals are about four nanometers in size — meaning you could fit more than 250,000,000,000 on the head of a pin — and float them in a liquid solution, so "like you print a newspaper, you can print solar cells," said Richard L. Brutchey, assistant professor of chemistry at the USC Dornsife College of Letters, Arts and Sciences.

Brutchey and USC postdoctoral researcher David H. Webber developed a new surface coating for the nanocrystals, which are made of the semiconductor cadmium selenide. Their research is featured as a "hot article" this month in the international journal for inorganic chemistry Dalton Transactions.

Liquid nanocrystal solar cells are cheaper to fabricate than available single-crystal silicon wafer solar cells but are not nearly as efficient at converting sunlight to electricity. Brutchey and Webber solved one of the key problems of liquid solar cells: how to create a stable liquid that also conducts electricity.

In the past, organic ligand molecules were attached to the nanocrystals to keep them stable and to prevent them from sticking together. These molecules also insulated the crystals, making the whole thing terrible at conducting electricity.

"That has been a real challenge in this field," Brutchey said.

Brutchey and Webber discovered a synthetic ligand that not only works well at stabilizing nanocrystals, but actually builds tiny bridges connecting the nanocrystals to help transmit current.

With a relatively low-temperature process, the researchers' method also allows for the possibility that solar cells can be printed onto plastic instead of glass without any issues with melting – resulting in a flexible solar panel that can be shaped to fit anywhere.

As they continue their research, Brutchey said he plans to work on nanocrystals built from materials other than cadmium, which is restricted in commercial applications due to toxicity.

"While the commercialization of this technology is still years away, we see a clear path forward toward integrating this into the next generation of solar cell technologies," Brutchey said.

Source: University of Southern California – 25.04.2012.

Investigated and edited by:

Dr.-Ing. Christoph Konetschny, Materials Consultant, Owner of Materialsgate
The investigation and editing of this document was performed with best care and attention. For the accuracy, validity, availability and applicability of the given information, we take no liability. Please discuss the suitability concerning your specific application with the experts of the named company or organization.

You want additional material or technology investigations concerning this subject?

Materialsgate is leading in material consulting and material investigation.
Feel free to use our established consulting services

MMore on this topic

The coolest new nanomaterial of the 21st century could boost the efficiency of the next generation of solar panels, a team of Michigan Technological University materials scientists has discovered.
Graphene, a two-dimensional honeycomb of carbon atoms, is a rising star in the materials community for its radical properties. One of those properties is electrical conductivity, which could make it a key ingredient in the next generation of photovoltaic cells, says Yun Hang Hu, a professor of materials science and engineering. Dye-sensitized solar cells don’t rely on rare or expensive materials, so they could be more cost-effective than cells based on silicon and thin-film technologies. But... more
Intensive research around the world has focused on improving the performance of solar photovoltaic cells and bringing down their cost. But very little attention has been paid to the best ways of arranging those cells, which are typically placed flat on a rooftop or other surface, or sometimes attached to motorized structures that keep the cells pointed toward the sun as it crosses the sky.
Now, a team of MIT researchers has come up with a very different approach: building cubes or towers that extend the solar cells upward in three-dimensional configurations. Amazingly, the results from the structures they’ve tested show power output ranging from double to more than 20 times that of fixed flat panels with the same base area. The biggest boosts in power were seen in the situations where improvements are most needed: in locations far from the equator, in winter months and on cloudier... more
In the effort to convert sunlight into electricity, photovoltaic solar cells that use conductive organic polymers for light absorption and conversion have shown great potential. Organic polymers can be produced in high volumes at low cost, resulting in photovoltaic devices that are cheap, lightweight and flexible.
In the last few years, much work has been done to improve the efficiency with which these devices convert sunlight into power, including the development of new materials, device structures and processing techniques. In a new study, available online this week in the journal Nature Photonics, researchers at the UCLA Henry Samueli School of Engineering and Applied Science and UCLA's California Nanosystems Institute (CNSI) report that they have significantly enhanced polymer solar cells'... more
Imagine if the next coat of paint you put on the outside of your home generates electricity from light—electricity that can be used to power the appliances and equipment on the inside.
A team of researchers at the University of Notre Dame has made a major advance toward this vision by creating an inexpensive “solar paint” that uses semiconducting nanoparticles to produce energy. “We want to do something transformative, to move beyond current silicon-based solar technology,” says Prashant Kamat, John A. Zahm Professor of Science in Chemistry and Biochemistry and an investigator in Notre Dame’s Center for Nano Science and Technology (NDnano), who leads the research... more
RSS
facebook
xing
twitter
linkedin

MaterialCards Weekly

Your personal and free material reminder - weekly by email

Service:
Material Charac­teri­za­tion
and Testing

You Need Advanced and Efficient Methods of Material Charac­teri­za­tion and Testing to Optimize Your Products?
Characterization of Coatings
Characterization of Joining Technologies
Microstructure Analysis
Characterization of Composites
Element Mapping
Characterization of Catalysts
Characterization of Diffusion Profiles
Failure Analysis of Products
Ceramography
Characterization of Nano-Coatings
Thermography
Corrosion Tests
Testing of Plastics and Polymers
Failure Analysis of Composites
Characterization of Electrical and Thermal Properties
Fracture Mechanics
Characterization of Materials for Medical Applications
Automotive Testing
Metallography
Characterization of Barrier Properties
Characterization of Coatings
Characterization of Joining Technologies
Microstructure Analysis
Characterization of Composites
Element Mapping
Characterization of Catalysts
Characterization of Diffusion Profiles
Failure Analysis of Products
Ceramography
Characterization of Nano-Coatings
Thermography
Corrosion Tests
Testing of Plastics and Polymers
Failure Analysis of Composites
Characterization of Electrical and Thermal Properties
Fracture Mechanics
Characterization of Materials for Medical Applications
Automotive Testing
Metallography
Characterization of Barrier Properties
Contact us – We will forward your request to one of our qualified co­operation partners in this field. All of them operate certified la­bo­ra­to­ries with modern and the most diverse equipment.

Recommended Books

Vesselinka Petrova-Koch et al.
Springer-Verlag Gmbh
Andreas Wagner
Springer