MMaterialNews 2012/07/11

Tiny bubbles snap carbon nanotubes like twigs

Rice University study details exactly how nanotubes bend and break
What’s 100 times stronger than steel, weighs one-sixth as much and can be snapped like a twig by a tiny air bubble? The answer is a carbon nanotube — and a new study by Rice University scientists details exactly how the much-studied nanomaterials snap when subjected to ultrasonic vibrations in a liquid.

“We find that the old saying ‘I will break but not bend’ does not hold at the micro- and nanoscale,” said Rice engineering researcher Matteo Pasquali, the lead scientist on the study, which appears this month in the Proceedings of the National Academy of Sciences.

Carbon nanotubes — hollow tubes of pure carbon about as wide as a strand of DNA — are one of the most-studied materials in nanotechnology. For well over a decade, scientists have used ultrasonic vibrations to separate and prepare nanotubes in the lab. In the new study, Pasquali and colleagues show how this process works — and why it’s a detriment to long nanotubes. That’s important for researchers who want to make and study long nanotubes.

“We found that long and short nanotubes behave very differently when they are sonicated,” said Pasquali, professor of chemical and biomolecular engineering and of chemistry at Rice. “Shorter nanotubes get stretched while longer nanotubes bend. Both mechanisms can lead to breaking.”

Discovered more than 20 years ago, carbon nanotubes are one of the original wonder materials of nanotechnology. They are close cousins of the buckyball, the particle whose 1985 discovery at Rice helped kick off the nanotechnology revolution.

Nanotubes can be used in paintable batteries and sensors, to diagnose and treat disease, and for next-generation power cables in electrical grids. Many of the optical and material properties of nanotubes were discovered at Rice’s Smalley Institute for Nanoscale Science and Technology, and the first large-scale production method for making single-wall nanotubes was discovered at Rice by the institute’s namesake, the late Richard Smalley.

“Processing nanotubes in liquids is industrially important but it’s quite difficult because they tend to clump together,” co-author Micah Green said. “These nanotube clumps won’t dissolve in common solvents, but sonication can break these clumps apart in order to separate, i.e., disperse, the nanotubes.”

Newly grown nanotubes can be a thousand times longer than they are wide, and although sonication is very effective at breaking up the clumps, it also makes the nanotubes shorter. In fact, researchers have developed an equation called a “power law” that describes how dramatic this shortening will be. Scientists input the sonication power and the amount of time the sample will be sonicated, and the power law tells them the average length of the nanotubes that will be produced. The nanotubes get shorter as power and exposure time increase.

“The problem is that there are two different power laws that match with separate experimental findings, and one of them produces a length that’s a good deal shorter than the other,” Pasquali said. “It’s not that one is correct and the other is wrong. Each has been verified experimentally, so it’s a matter of understanding why. Philippe Poulin first exposed this discrepancy in the literature and brought the problem to my attention when I was visiting his lab three years ago.”

To investigate this discrepancy, Pasquali and study co-authors Guido Pagani, Micah Green and Poulin set out to accurately model the interactions between the nanotubes and the sonication bubbles. Their computer model, which ran on Rice’s Cray XD1 supercomputer, used a combination of fluid dynamics techniques to accurately simulate the interaction. When the team ran the simulations, they found that longer tubes behaved very differently from their shorter counterparts.

“If the nanotube is short, one end will get drawn down by the collapsing bubble so that the nanotube is aligned toward the center of the bubble,” Pasquali said. “In this case, the tube doesn’t bend, but rather stretches. This behavior had been previously predicted, but we also found that long nanotubes did something unexpected. The model showed how the collapsing bubble drew longer nanotubes inward from the middle, bending them and snapping them like twigs.”

Pasquali said the model shows how both power laws can each be correct: One is describing a process that affects longer nanotubes and another describes a process that affects shorter ones.

“It took some flexibility to understand what was happening,” Pasquali said. “But the upshot is that we have a very accurate description of what happens when nanotubes are sonicated.”

Study co-authors include Pagani, formerly a visiting scholar at Rice, who studied the sonication process as part of his master’s thesis research; Green, a former Evans Attwell-Welch Postdoctoral Researcher at Rice who is now a faculty member at Texas Tech University; and Poulin, research director at the Centre National de la Recherche Scientifique and a faculty member at the University of Bordeaux in Pessac, France.

The research was supported by the Air Force Office of Scientific Research, the Air Force Research Laboratory, the Welch Foundation’s Evans Attwell-Welch Fellowship Program, the National Science Foundation, Cray, AMD, Rice’s Ken Kennedy Institute for Information Technology and the Texas Tech University High Performance Computing Center.

Source: Rice University – 09.07.2012.

Investigated and edited by:

Dr.-Ing. Christoph Konetschny, Materials Consultant, Owner of Materialsgate
The investigation and editing of this document was performed with best care and attention. For the accuracy, validity, availability and applicability of the given information, we take no liability. Please discuss the suitability concerning your specific application with the experts of the named company or organization.

You want additional material or technology investigations concerning this subject?

Materialsgate is leading in material consulting and material investigation.
Feel free to use our established consulting services

MMore on this topic

Multi-walled carbon nanotubes riddled with defects and impurities on the outside could replace some of the expensive platinum catalysts used in fuel cells and metal-air batteries, according to scientists at Stanford University. Their findings are published in the May 27 online edition of the journal Nature Nanotechnology.
"Platinum is very expensive and thus impractical for large-scale commercialization," said Hongjie Dai, a professor of chemistry at Stanford and co-author of the study. "Developing a low-cost alternative has been a major research goal for several decades." Over the past five years, the price of platinum has ranged from just below $800 to more than $2,200 an ounce. Among the most promising, low-cost alternatives to platinum is the carbon nanotube – a rolled-up sheet of pure... more
Forests of carbon nanotubes are an efficient alternative for platinum electrodes in dye-sensitized solar cells (DSC), according to new research by collaborators at Rice University and Tsinghua University.
The single-wall nanotube arrays, grown in a process invented at Rice, are both much more electroactive and potentially cheaper than platinum, a common catalyst in DSCs, said Jun Lou, a materials scientist at Rice. In combination with newly developed sulfide electrolytes synthesized at Tsinghua, they could lead to more efficient and robust solar cells at a fraction of the current cost for traditional silicon-based solar cells. Lou and co-lead investigator Hong Lin, a professor of materials science... more
Researchers at Rice University and Penn State University have discovered that adding a dash of boron to carbon while creating nanotubes turns them into solid, spongy, reusable blocks that have an astounding ability to absorb oil spilled in water.
That’s one of a range of potential innovations for the material created in a single step. The team found for the first time that boron puts kinks and elbows into the nanotubes as they grow and promotes the formation of covalent bonds, which give the sponges their robust qualities. The researchers, who collaborated with peers in labs around the nation and in Spain, Belgium and Japan, revealed their discovery in Nature’s online open-access journal Scientific Reports. Lead author Daniel Hashim... more
Lesen Sie auch:
Researchers at Oregon State University have tapped into the extraordinary power of carbon “nanotubes” to increase the speed of biological sensors, a technology that might one day allow a doctor to routinely perform lab tests in minutes, speeding diagnosis and treatment while reducing costs.
The new findings have almost tripled the speed of prototype nano-biosensors, and should find applications not only in medicine but in toxicology, environmental monitoring, new drug development and other fields. The research was just reported in Lab on a Chip, a professional journal. More refinements are necessary before the systems are ready for commercial production, scientists say, but they hold great potential. “With these types of sensors, it should be possible to do many medical lab tests... more
RSS
facebook
xing
twitter
linkedin

MaterialCards Weekly

Your personal and free material reminder - weekly by email

Service:
Material Charac­teri­za­tion
and Testing

You Need Advanced and Efficient Methods of Material Charac­teri­za­tion and Testing to Optimize Your Products?
Failure Analysis of Composites
Characterization of Materials for Medical Applications
Thermography
Characterization of Composites
Element Mapping
Ceramography
Microstructure Analysis
Characterization of Electrical and Thermal Properties
Characterization of Nano-Coatings
Characterization of Joining Technologies
Characterization of Diffusion Profiles
Corrosion Tests
Characterization of Catalysts
Characterization of Coatings
Fracture Mechanics
Automotive Testing
Metallography
Testing of Plastics and Polymers
Characterization of Barrier Properties
Failure Analysis of Products
Failure Analysis of Composites
Characterization of Materials for Medical Applications
Thermography
Characterization of Composites
Element Mapping
Ceramography
Microstructure Analysis
Characterization of Electrical and Thermal Properties
Characterization of Nano-Coatings
Characterization of Joining Technologies
Characterization of Diffusion Profiles
Corrosion Tests
Characterization of Catalysts
Characterization of Coatings
Fracture Mechanics
Automotive Testing
Metallography
Testing of Plastics and Polymers
Characterization of Barrier Properties
Failure Analysis of Products
Contact us – We will forward your request to one of our qualified co­operation partners in this field. All of them operate certified la­bo­ra­to­ries with modern and the most diverse equipment.

Recommended Books

Kenneth J. Klabunde, Ryan M. Richards
John Wiley & Sons
John Wiley & Sons
Wiley-VCH Verlag GmbH & Co. KGaA