MMaterialsgateNEWS 2017/04/28

Move over, Superman! NIST method sees through concrete to detect early-stage corrosion

When you suffer a fall, an on-the-field collision or some other traumatic blow, the first thing the doctor will do is take an X-ray, CT scan or MRI to determine if anything has been damaged internally.

Researchers at the National Institute of Standards and Technology (NIST) are using the same principle, but in a more powerful form, to detect corrosion, the primary danger threatening the health of the steel framework within the nation's bridges, roads and other aging physical infrastructure.

What they have developed is a noninvasive "spectral fingerprint" technique that reveals the corrosion of concrete-encased steel before it can cause any significant degradation of the structure it supports. The detection method is described in a new paper in the journal Applied Magnetic Resonance.

When water and oxygen corrode iron, different iron oxide products are produced, with the two most common being goethite and hematite. "The brown rust that forms when you leave a hammer out in the rain is mostly goethite, and when a steel reinforcing bar [rebar] corrodes inside a concrete bridge deck, that is mostly hematite," said NIST physical chemist Dave Plusquellic. "We have shown in our new study with goethite, and our previous work with hematite (link is external), that terahertz radiation--electromagnetic waves with frequencies 10 to 100 times higher than the microwaves used to cook food--can detect both corrosion products in the early stages of formation."

Current imaging methods for uncovering corrosion use microwaves to record changes in the physical state of the affected steel, such as changes in the thickness of a rebar within the concrete of a bridge or other structure.

"Unfortunately, by the time such changes are detectable, the corrosive process is already well on its way toward causing cracks in the concrete," said physicist and NIST Fellow Ed Garboczi.

Additionally, Garboczi said most of the microwave imaging methods rely on comparisons with baseline measurements of the steel taken at the time of construction, a practice that only goes back about 25 years.

"That's a real problem since the average age of the 400,000 steel-reinforced concrete bridges in the United States is 50 years and there is no baseline data available for many of them," he explained.

The NIST terahertz wave detection method works because goethite and hematite are antiferromagnetic. In other words, the pairs of electrons sitting side-by-side within the iron atoms in these materials spin in opposite directions, leaving them unaffected by external magnetic fields. In contrast, the electrons in the iron atoms of a household magnet, which is ferromagnetic, spin in the same direction and are either attracted or repelled by external magnetic fields.

"Terahertz waves will flip the spin alignment of one of the electrons in a pair and get absorbed by hematite or goethite," Plusquellic said. "Using a millimeter wave detector, we discovered that this antiferromagnetic absorption only occurs within narrow frequency ranges in the terahertz region of the electromagnetic spectrum--yielding 'spectral fingerprints' unique to goethite and hematite, and in turn, iron corrosion."

With current advances in terahertz sources and detectors, the new NIST nondestructive evaluation technique has the potential to rapidly detect tiny amounts of iron-bearing oxides from early-stage corrosion of steel surrounded by concrete, polymer composites (such as pipe insulation in a factory), paints and other protective materials.

"In the laboratory, we have demonstrated that a 2-milliwatt terahertz source can produce waves that detect hematite through 25 millimeters of concrete," Plusquellic said. "Using terahertz sources with powers in the hundreds of milliwatts and state-of-the-art receivers with unprecedented signal-to-noise ratios, we should be able to penetrate 50 millimeters, the thickness of the concrete covering the first layer of rebar used in most steel-reinforced concrete structures."

Next up for the NIST team will be an attempt to find a spectral fingerprint for akageneite, an iron corrosion product formed in the presence of chloride ions, which come from sources such as seawater and road deicing salt.

"Akageneite can cause problems in steel-reinforced concrete similar to those seen with goethite and hematite," Garboczi said.

The antiferromagnetic corrosion detection method was first conceived in 2009 by the late William Egelhoff, a NIST fellow and pioneer in the field of magnetic materials.

Source: National Institute of Standards and Technology (NIST) – 26.04.2017.

S.G. Chou, P.E. Stutzman, V. Provenzano, R.D. McMichael, J. Surek, S. Wang, D.F. Plusquellic and E.J. Garboczi. "Using Terahertz Waves to Identify the Presence of Goethite via Antiferromagnetic Resonance." Applied Magnetic Resonance (April 2017). DOI: 10.1007/s00723-017-0884-y

Investigated and edited by:

Dr.-Ing. Christoph Konetschny, Inhaber und Gründer von Materialsgate
Büro für Material- und Technologieberatung
The investigation and editing of this document was performed with best care and attention.
For the accuracy, validity, availability and applicability of the given information, we take no liability.
Please discuss the suitability concerning your specific application with the experts of the named company or organization.

You want additional material or technology investigations concerning this subject?

Materialsgate is leading in material consulting and material investigation.
Feel free to use our established consulting services

MMore on this topic

Professor of the Institute of Civil Engineering of Peter the Great Saint-Petersburg Polytechnic University (SPbPU) Andrey Ponomarev and a graduate student Alexander Rassokhin developed a new construction technology.

Scientists created several types of building blocks based on nanostructured high-strength lightweight concrete, reinforced with skew-angular composite coarse grids. The development has unique characteristics, enabling the increase of load-carrying capability by more than 200% and decrease in specific density of the construction by 80%. In addition, among the advantages, are resistance to corrosion, aggressive environments and excessive frost resistance. Researchers calculated that the service life of the building structures, made with the use of this reinforcement system, will increase at least 2-3 times in comparison with its modern analogs. "Such system allows to ensure the structure... more read more

Rice University scientists develop 'programmable' cement particles to attain enhanced properties

Bringing order to disorder is key to making stronger and greener cement, the paste that binds concrete. Scientists at Rice University have decoded the kinetic properties of cement and developed a way to "program" the microscopic, semicrystalline particles within. The process turns particles from disordered clumps into regimented cubes, spheres and other forms that combine to make the material less porous and more durable. Their study appears in the Royal Society of Chemistry's Journal of Materials Chemistry A. The technique may lead to stronger structures that require less concrete -- and less is better, said Rice materials scientist and lead author Rouzbeh Shahsavari... more read more

Researchers from North Carolina State University and the University of Eastern Finland have developed a new technique for tracking water in concrete structures - allowing engineers to identify potential issues before they become big problems.

"When we think about construction - from bridges and skyscrapers to nuclear plants and dams - they all rely on concrete," says Mohammad Pour-Ghaz, an assistant professor of civil, construction and environmental engineering at North Carolina State University and lead investigator on the project. Tracking concrete degradation is essential to public safety, and the culprit behind concrete degradation is water. Water contributes to the degradation by itself, or it can carry other chemicals - like the road salt used on bridges - that can expedite corrosion of both concrete and its underlying steel reinforcement structure. "We have developed a technology that allows us to identify... more read more

What does one need to strengthen or toughen concrete? A lot of nothing. Or something.

The "nothing" is in the form of microscopic voids and the "something" consists of particular particles embedded in the most common construction material on Earth. Rice University materials scientist Rouzbeh Shahsavari and postdoctoral researcher Ning Zhang analyzed more than 600 computer models of concrete's inner matrix to determine that both voids and portlandite particles are significant players in giving the material its remarkable qualities. The research appears this month in the Journal of the Mechanics and Physics of Solids. Shahsavari and his team set out to provide new insights and to design guidelines and strategies to make the cement hydrate -- known... more read more


Partner of the Week

Search in MaterialsgateNEWS

Books and products