MMaterialNews 2012/01/09

Medical Technology: Team designs a bandage that spurs, guides blood vessel growth

Researchers have developed a bandage that stimulates and directs blood vessel growth on the surface of a wound. The bandage, called a “microvascular stamp,” contains living cells that deliver growth factors to damaged tissues in a defined pattern. After a week, the pattern of the stamp “is written in blood vessels,” the researchers report.
A paper describing the new approach will appear as the January 2012 cover article of the journal Advanced Materials.

“Any kind of tissue you want to rebuild, including bone, muscle or skin, is highly vascularized,” said University of Illinois chemical and biomolecular engineering professor Hyunjoon Kong, a co-principal investigator on the study with electrical and computer engineering professor Rashid Bashir. “But one of the big challenges in recreating vascular networks is how we can control the growth and spacing of new blood vessels.”

“The ability to pattern functional blood vessels at this scale in living tissue has not been demonstrated before,” Bashir said. “We can now write features in blood vessels.”

Other laboratories have embedded growth factors in materials applied to wounds in an effort to direct blood vessel growth. The new approach is the first to incorporate live cells in a stamp. These cells release growth factors in a more sustained, targeted manner than other methods, Kong said.

The stamp is nearly 1 centimeter across and is built of layers of a hydrogel made of polyethylene glycol (an FDA-approved polymer used in laxatives and pharmaceuticals) and methacrylic alginate (an edible, Jell-O-like material).

The stamp is porous, allowing small molecules to leak through, and contains channels of various sizes to direct the flow of larger molecules, such as growth factors.

The researchers tested the stamp on the surface of a chicken embryo. After a week the stamp was removed, revealing a network of new blood vessels that mirrored the pattern of the channels in the stamp.

“This is a first demonstration that the blood vessels are controlled by the biomaterials,” Kong said.

The researchers see many potential applications for the new stamp, from directing the growth of blood vessels around a blocked artery, to increasing the vascularization of tissues with poor blood flow, to “normalizing” blood vessels that feed a tumor to improve the delivery of anti-cancer drugs. Enhancing the growth of new blood vessels in a coordinated pattern after surgery may also reduce recovery time and lessen the amount of scar tissue, the researchers said.

In another study published earlier this year, the team developed a biodegradable material that supports living cells. Future research will test whether the new material also can be used a stamp.

Researchers on the study team also included K. Jimmy Hsia, a professor of mechanical science and engineering and of bioengineering at Illinois; postdoctoral researchers Jae Hyun Jeong and Pinar Zorlutuna; and graduate students Vincent Chan, Chaenyung Cha and Casey Dyck.

Source: University of Illinois at Urbana-Champaign - 15.12.2011.

Investigated and edited by:

Dr.-Ing. Christoph Konetschny, Materials Consultant, Owner of Materialsgate
The investigation and editing of this document was performed with best care and attention. For the accuracy, validity, availability and applicability of the given information, we take no liability. Please discuss the suitability concerning your specific application with the experts of the named company or organization.

You want additional material or technology investigations concerning this subject?

Materialsgate is leading in material consulting and material investigation.
Feel free to use our established consulting services

MMore on this topic

Lubricant in metal-on-metal hip implants found to be graphite, not proteins
A team of engineers and physicians have made a surprising discovery that offers a target for designing new materials for hip implants that are less susceptible to the joint's normal wear and tear. Researchers from Northwestern University, Rush University Medical Center, Chicago, and the University of Duisburg-Essen Germany found that graphitic carbon is a key element in a lubricating layer that forms on metal-on-metal hip implants. The lubricant is more similar to the lubrication of a combustion... more
Bioengineers at Tufts University School of Engineering have developed a new silk-based microneedle system able to deliver precise amounts of drugs over time and without need for refrigeration. The tiny needles can be fabricated under normal temperature and pressure and from water, so they can be loaded with sensitive biochemical compounds and maintain their activity prior to use. They are also biodegradable and biocompatible.
The research paper "Fabrication of Silk Microneedles for Controlled-Release Drug Delivery" appeared in Advanced Functional Materials December 2 online in advance of print. The Tufts researchers successfully demonstrated the ability of the silk microneedles to deliver a large-molecule, enzymatic model drug, horseradish peroxidase (HRP), at controlled rates while maintaining bioactivity. In addition, silk microneedles loaded with tetracycline were found to inhibit the growth of Staphylococcus... more
It looks like bone. It feels like bone. For the most part, it acts like bone. And it came off an inkjet printer.
Washington State University researchers have used a 3D printer to create a bone-like material and structure that can be used in orthopedic procedures, dental work and to deliver medicine for treating osteoporosis. Paired with actual bone, it acts as a scaffold for new bone to grow on and ultimately dissolves with no apparent ill effects. The authors report on successful in vitro tests in the journal Dental Materials and say they’re already seeing promising results with in vivo tests on rats and... more
Advances in microchip technology may someday enable clinicians to perform tests for hundreds of diseases — sifting out specific molecules, such as early stage cancer cells — from just one drop of blood. But fabricating such “lab-on-a-chip” designs — tiny, integrated diagonistic sensor arrays on surfaces as small as a square centimeter — is a technically challenging, time-consuming and expensive feat.
Now, an MIT researcher — together with colleagues at the University of Illinois at Urbana-Champaign — has come up with a simple, precise and reproducible technique that cuts the time and cost of fabricating such sensors. Nicholas Fang, associate professor of mechanical engineering, has developed an engraving technique that etches tiny, nano-sized patterns on metallic surfaces using a small, voltage-activated stamp made out of glass. Fang says the engravings, made of tiny dots smaller than one... more
RSS
facebook
xing
twitter
linkedin

MaterialCards Weekly

Your personal and free material reminder - weekly by email

Service:
Material Charac­teri­za­tion
and Testing

You Need Advanced and Efficient Methods of Material Charac­teri­za­tion and Testing to Optimize Your Products?
Failure Analysis of Products
Characterization of Electrical and Thermal Properties
Characterization of Catalysts
Characterization of Coatings
Fracture Mechanics
Metallography
Ceramography
Failure Analysis of Composites
Testing of Plastics and Polymers
Characterization of Diffusion Profiles
Characterization of Materials for Medical Applications
Corrosion Tests
Element Mapping
Microstructure Analysis
Characterization of Barrier Properties
Characterization of Joining Technologies
Thermography
Characterization of Nano-Coatings
Characterization of Composites
Automotive Testing
Failure Analysis of Products
Characterization of Electrical and Thermal Properties
Characterization of Catalysts
Characterization of Coatings
Fracture Mechanics
Metallography
Ceramography
Failure Analysis of Composites
Testing of Plastics and Polymers
Characterization of Diffusion Profiles
Characterization of Materials for Medical Applications
Corrosion Tests
Element Mapping
Microstructure Analysis
Characterization of Barrier Properties
Characterization of Joining Technologies
Thermography
Characterization of Nano-Coatings
Characterization of Composites
Automotive Testing
Contact us – We will forward your request to one of our qualified co­operation partners in this field. All of them operate certified la­bo­ra­to­ries with modern and the most diverse equipment.