MMaterialNews 2012/03/07

Bionic: Iowa State engineer discovers spider silk conducts heat as well as metals

Xinwei Wang had a hunch that spider webs were worth a much closer look. So he ordered eight spiders - Nephila clavipes, golden silk orbweavers - and put them to work eating crickets and spinning webs in the cages he set up in an Iowa State University greenhouse.
Wang, an associate professor of mechanical engineering at Iowa State, studies thermal conductivity, the ability of materials to conduct heat. He's been looking for organic materials that can effectively transfer heat. It's something diamonds, copper and aluminum are very good at; most materials from living things aren't very good at all.

But spider silk has some interesting properties: it's very strong, very stretchy, only 4 microns thick (human hair is about 60 microns) and, according to some speculation, could be a good conductor of heat. But nobody had actually tested spider silk for its thermal conductivity.

And so Wang, with partial support from the Army Research Office and the National Science Foundation, decided to try some lab experiments. Xiaopeng Huang, a post-doctoral research associate in mechanical engineering; and Guoqing Liu, a doctoral student in mechanical engineering, helped with the project.

"I think we tried the right material," Wang said of the results.

What Wang and his research team found was that spider silks - particularly the draglines that anchor webs in place - conduct heat better than most materials, including very good conductors such as silicon, aluminum and pure iron. Spider silk also conducts heat 1,000 times better than woven silkworm silk and 800 times better than other organic tissues.

A paper about the discovery - "New Secrets of Spider Silk: Exceptionally High Thermal Conductivity and its Abnormal Change under Stretching" - has just been published online by the journal Advanced Materials.

"Our discoveries will revolutionize the conventional thought on the low thermal conductivity of biological materials," Wang wrote in the paper.

The paper reports that using laboratory techniques developed by Wang - "this takes time and patience" - spider silk conducts heat at the rate of 416 watts per meter Kelvin. Copper measures 401. And skin tissues measure .6.

"This is very surprising because spider silk is organic material," Wang said. "For organic material, this is the highest ever. There are only a few materials higher - silver and diamond."

Even more surprising, he said, is when spider silk is stretched, thermal conductivity also goes up. Wang said stretching spider silk to its 20 percent limit also increases conductivity by 20 percent. Most materials lose thermal conductivity when they're stretched.

That discovery "opens a door for soft materials to be another option for thermal conductivity tuning," Wang wrote in the paper.

And that could lead to spider silk helping to create flexible, heat-dissipating parts for electronics, better clothes for hot weather, bandages that don't trap heat and many other everyday applications.

What is it about spider silk that gives it these unusual heat-carrying properties?

Wang said it's all about the defect-free molecular structure of spider silk, including proteins that contain nanocrystals and the spring-shaped structures connecting the proteins. He said more research needs to be done to fully understand spider silk's heat-conducting abilities.

Wang is also wondering if spider silk can be modified in ways that enhance its thermal conductivity. He said the researchers' preliminary results are very promising.

And then Wang marveled at what he's learning about spider webs, everything from spider care to web unraveling techniques to the different silks within a single web. All that has one colleague calling him Iowa State's Spiderman.

"I've been doing thermal transport for many years," Wang said. "This is the most exciting thing, what I'm doing right now."

Source: Iowa State University – 05.03.2012.

Investigated and edited by:

Dr.-Ing. Christoph Konetschny, Materials Consultant, Owner of Materialsgate
The investigation and editing of this document was performed with best care and attention. For the accuracy, validity, availability and applicability of the given information, we take no liability. Please discuss the suitability concerning your specific application with the experts of the named company or organization.

You want additional material or technology investigations concerning this subject?

Materialsgate is leading in material consulting and material investigation.
Feel free to use our established consulting services

MMore on this topic

Research was published this week showing that silk produced by transgenically-engineered silkworms in the laboratory of Malcolm Fraser Jr., professor of biological sciences at University of Notre Dame, exhibits the highly sought-after strength and elasticity of spider silk. This stronger silk could possibly be used to make sutures, artificial limbs and parachutes.
The findings were published in the Proceedings of the National Academy of Sciences and highlighted for their breakthrough in the long search for silk with such mechanical properties. The manuscript was published after an in-depth peer review process, and was deemed by the publishers as a newsworthy article of the issue in which it appears, further indicating its relative importance to science and technology. “It’s something nobody has done before,” Fraser says. The project, which used Fraser’s... more
Bioengineers at Tufts University School of Engineering have developed a new silk-based microneedle system able to deliver precise amounts of drugs over time and without need for refrigeration. The tiny needles can be fabricated under normal temperature and pressure and from water, so they can be loaded with sensitive biochemical compounds and maintain their activity prior to use. They are also biodegradable and biocompatible.
The research paper "Fabrication of Silk Microneedles for Controlled-Release Drug Delivery" appeared in Advanced Functional Materials December 2 online in advance of print. The Tufts researchers successfully demonstrated the ability of the silk microneedles to deliver a large-molecule, enzymatic model drug, horseradish peroxidase (HRP), at controlled rates while maintaining bioactivity. In addition, silk microneedles loaded with tetracycline were found to inhibit the growth of Staphylococcus... more
"Shrilk" could one day replace plastic in consumer products, be used to suture wounds, and serve as scaffolding for tissue regeneration
Researchers at the Wyss Institute for Biologically Inspired Engineering at Harvard University have developed a new material that replicates the exceptional strength, toughness, and versatility of one of nature's more extraordinary substances -- insect cuticle. Also low-cost, biodegradable, and biocompatible, the new material, called "Shrilk," could one day replace plastics in consumer products and be used safely in a variety of medical applications. The research findings appear today... more
Scientists now have a better understanding of why spider silk fibers are so incredibly strong. Recent research, published by Cell Press on February 15th in Biophysical Journal, describes the architecture of silk fibers from the atomic level up and reveals new information about the molecular structure that underlies the amazing mechanical characteristics of this fascinating natural material.
Spiders spin silk, which is remarkably strong and stretchy, to use in webs and to suspend themselves. "Silk fibers exhibit astonishing mechanical properties. They have an ultimate strength comparable to steel, toughness greater than Kevlar and a density less than cotton or nylon," explains senior study author Dr. Frauke Gräter from the Heidelberg Institute for Theoretical Studies in Germany. "Because silk fibers continue to outperform their artificial counterparts in terms of toughness... more
RSS
facebook
xing
twitter
linkedin

MaterialCards Weekly

Your personal and free material reminder - weekly by email

Service:
Material Charac­teri­za­tion
and Testing

You Need Advanced and Efficient Methods of Material Charac­teri­za­tion and Testing to Optimize Your Products?
Characterization of Joining Technologies
Characterization of Nano-Coatings
Characterization of Coatings
Thermography
Ceramography
Testing of Plastics and Polymers
Characterization of Diffusion Profiles
Characterization of Barrier Properties
Element Mapping
Characterization of Composites
Characterization of Electrical and Thermal Properties
Metallography
Failure Analysis of Composites
Characterization of Materials for Medical Applications
Automotive Testing
Characterization of Catalysts
Corrosion Tests
Fracture Mechanics
Failure Analysis of Products
Microstructure Analysis
Characterization of Joining Technologies
Characterization of Nano-Coatings
Characterization of Coatings
Thermography
Ceramography
Testing of Plastics and Polymers
Characterization of Diffusion Profiles
Characterization of Barrier Properties
Element Mapping
Characterization of Composites
Characterization of Electrical and Thermal Properties
Metallography
Failure Analysis of Composites
Characterization of Materials for Medical Applications
Automotive Testing
Characterization of Catalysts
Corrosion Tests
Fracture Mechanics
Failure Analysis of Products
Microstructure Analysis
Contact us – We will forward your request to one of our qualified co­operation partners in this field. All of them operate certified la­bo­ra­to­ries with modern and the most diverse equipment.

Recommended Books

Torsten Rossmann, Cameron Tropea
Springer, Berlin
Nils Bramberg, Hrsg.
FastBook Publishing