MMaterialNews 2012/05/22

Using Graphene, Scientists Develop a Less Toxic Way to Rust-Proof Steel

Nontoxic composite under development at UB could replace commonly used toxic coatings
University at Buffalo researchers are making significant progress on rust-proofing steel using a graphene-based composite that could serve as a nontoxic alternative to coatings that contain hexavalent chromium, a probable carcinogen.

In the scientists' first experiments, pieces of steel coated with the high-tech varnish remained rust-free for only a few days when immersed continuously in saltwater, an environment that accelerates corrosion.

By adjusting the concentration and dispersion of graphene within the composite, the researchers increased to about a month the amount of time the treated steel can survive in brine. (Because brine is an extremely harsh environment, the coated steel's survival time in the real-world would be many times longer.)

The UB chemists leading the project are Sarbajit Banerjee, PhD, an assistant professor, and Robert Dennis, a PhD student. Their next step is to use a $50,000 grant from the New York State Pollution Prevention Institute to enhance the graphene composite's lasting power, as well as the quality of its finish.

Tata Steel, an international company that has provided past funding for Banerjee's projects, has been helping the scientists test larger sample sizes, Banerjee said.

Bringing the coating to the market could not only benefit public health, but also save jobs, said Dennis and Banerjee.

"Our product can be made to work with the existing hardware of many factories that specialize in chrome electroplating, including job shops in Western New York that grew around Bethlehem Steel," Banerjee said. "This could give factories a chance to reinvent themselves in a healthy way in a regulatory environment that is growing increasingly harsh when it comes to chromium pollution."

Graphene, the thinnest and strongest material known to man, consists of a single layer of carbon atoms linked in a honeycomb-like arrangement.

The material's hydrophobic and conductive properties may help prevent corrosion, repelling water and stunting electro-chemical reactions that transform iron into iron oxide, or rust, Banerjee said.

UB's Office of Science, Technology Transfer and Economic Outreach (STOR) has submitted a provisional patent application to protect the coating Banerjee and Dennis are refining. As sponsors of the research and due to inventive contribution by Tata employees, Tata Steel also has certain rights to the technology.

"Tata Steel has always displayed leadership in motivating innovative research and product development by leveraging partnerships with universities. UB has been one of our choices for cutting-edge coatings technology development on steel substrate," said Debashish Bhattacharjee, PhD, Tata Steel's group director for Research, Development and Technology.

"The development of an environmentally friendly alternative to hexavalent chromium would truly revolutionize this sector," said Anahita Williamson, PhD, director of the New York State Pollution Prevention Institute (NYSP2I), a research and technology transfer center funded by the New York State Department of Environmental Conservation. "The metals plating industry identified this as a high-priority research project and NYSP2I is excited to support UB researchers in their efforts to develop solutions."

The New York State Pollution Prevention Institute, headquartered at Rochester Institute of Technology (RIT), is a partnership between RIT, Clarkson University, Rensselaer Polytechnic Institute, UB and the state's network of Regional Technology Development Centers.

Banerjee, a materials chemist, has worked closely with industry and STOR to commercialize his research since joining UB in 2007.

In addition to his work on graphene, Banerjee has spoken to companies in the building materials industry about his research on vanadium oxide, a synthetic compound that could be used in "smart" windows that reflect heat from the sun only on hot days.

"UB 2020, our university's long-range plan, asks faculty to take an active role in translational research, and our rust-proofing project is an example of research that benefits communities on both a global and local scale," Banerjee said.

Source: University at Buffalo – 17.05.2012.

Investigated and edited by:

Dr.-Ing. Christoph Konetschny, Materials Consultant, Owner of Materialsgate
The investigation and editing of this document was performed with best care and attention. For the accuracy, validity, availability and applicability of the given information, we take no liability. Please discuss the suitability concerning your specific application with the experts of the named company or organization.

You want additional material or technology investigations concerning this subject?

Materialsgate is leading in material consulting and material investigation.
Feel free to use our established consulting services

MMore on this topic

The coolest new nanomaterial of the 21st century could boost the efficiency of the next generation of solar panels, a team of Michigan Technological University materials scientists has discovered.
Graphene, a two-dimensional honeycomb of carbon atoms, is a rising star in the materials community for its radical properties. One of those properties is electrical conductivity, which could make it a key ingredient in the next generation of photovoltaic cells, says Yun Hang Hu, a professor of materials science and engineering. Dye-sensitized solar cells don’t rely on rare or expensive materials, so they could be more cost-effective than cells based on silicon and thin-film technologies. But... more
Graphene could be the superhero of materials – it’s light, strong and conducts heat and electricity effectively, which makes it a great material for potential use in all kinds of electronics. And because it’s made from carbon atoms, graphene is cheap and plentiful.
Its electric and mechanical properties also affect one another in unique ways. But before freestanding graphene can live up to its potential, scientists need to be able to control these properties. A group of physicists from the University of Arkansas and other institutions have developed a technique that allows them to control the mechanical property, or strain, on freestanding graphene, sheets of carbon one-atom thick suspended over the tops of tiny squares of copper. By controlling the strain... more
By depositing atoms on one side of a grid of the “miracle material” graphene, researchers at Stanford have engineered piezoelectricity into a nanoscale material for the first time. The implications could yield dramatic degree of control in nanotechnology.
In what became known as the ‘Scotch tape technique,” researchers first extracted graphene with a piece of adhesive in 2004. Graphene is a single layer of carbon atoms arranged in a honeycomb, hexagonal pattern. It looks like chicken wire. Graphene is a wonder material. It is a one-hundred-times-better conductor of electricity than silicon. It is stronger than diamond. And, at just one atom thick, it is so thin as to be essentially a two-dimensional material. Such promising physics have made... more
RSS
facebook
xing
twitter
linkedin

MaterialCards Weekly

Your personal and free material reminder - weekly by email

Service:
Material Charac­teri­za­tion
and Testing

You Need Advanced and Efficient Methods of Material Charac­teri­za­tion and Testing to Optimize Your Products?
Fracture Mechanics
Thermography
Characterization of Diffusion Profiles
Characterization of Nano-Coatings
Testing of Plastics and Polymers
Ceramography
Characterization of Joining Technologies
Characterization of Catalysts
Characterization of Electrical and Thermal Properties
Characterization of Materials for Medical Applications
Failure Analysis of Composites
Failure Analysis of Products
Microstructure Analysis
Characterization of Composites
Metallography
Corrosion Tests
Characterization of Coatings
Automotive Testing
Characterization of Barrier Properties
Element Mapping
Fracture Mechanics
Thermography
Characterization of Diffusion Profiles
Characterization of Nano-Coatings
Testing of Plastics and Polymers
Ceramography
Characterization of Joining Technologies
Characterization of Catalysts
Characterization of Electrical and Thermal Properties
Characterization of Materials for Medical Applications
Failure Analysis of Composites
Failure Analysis of Products
Microstructure Analysis
Characterization of Composites
Metallography
Corrosion Tests
Characterization of Coatings
Automotive Testing
Characterization of Barrier Properties
Element Mapping
Contact us – We will forward your request to one of our qualified co­operation partners in this field. All of them operate certified la­bo­ra­to­ries with modern and the most diverse equipment.

Recommended Books

Frederic P. Miller et al.
Alphascript Publishing
S. Saito, A. Zettl
Elsevier Science & Technology