MMaterialNews 2011/09/21

Medical Engineering: Monitoring patients using intelligent t-shirts

Scientists at la Universidad Carlos III de Madrid (UC3M - Carlos III University in Madrid) who participate in the LOBIN consortium have developed an “intelligent” t- shirt that monitors the human body (temperature, heart rate, etc.) and locates patients within the hospital, as if it were a GPS system that works in closed spaces; it can even determine if the subject is seated, lying down, walking or running.
Using this garment-based patient biomonitoring platform allows us to register a number of the patient’s physiological parameters in a non-intrusive manner. “The information gathered by an intelligent t-shirt using e-textile technology is sent, without using wires, to an information management system, which then shows the patient’s location and vital signs in real time”, explain the UC3M researchers. The system is designed to be used in hospitals and can be divided into two parts: the fixed infrastructure, which would be pre-installed in the hospital, and the mobile units, which would move with the patients.

The mobile units include an “intelligent t-shirt” and a localization device, which can be carried in a pocket and, which they intend to incorporate into the garment in the future. The t-shirt is washable and includes electrodes that detect bioelectric power through which an electrocardiogram can be obtained. In addition, it has a removable device that includes a thermometer and an accelerometer, which are used to take the patient’s temperature, his/her relative position (reclining, standing, etc.) and his/her level of physical activity. Finally, the indoor localization unit is activated periodically, receives signals from the units that make up the fixed localization infrastructure and wirelessly sends that information to the information management system. Once the information is received there, the localization algorithm that has been developed is able to establish the individual’s position within a two-meter margin of error, and to mark the spot on a map of the hospital.
Sensor and t-shirt

Medical applications

The prototype was developed as part of the project “LOBIN: Localización y Biomonitorización a través de Redes Inalámbricas en Entornos Hospitalarios” (Locating and biomonitoring by means of Wireless Networks in Hospitals), funded by the Ministry of Industry, Tourism and Commerce, Plan Avanza I+D (Advance R + D Plan) (TSI-020302-2008-57), and is the result of the collaboration of the national consortium made up of researchers at UC3M and other companies and R+D centers, such as Simave Sistemas, Nlaza Soluciones, Nuubo and the Centro Tecnológico de Telecomunicaciones de Galicia (Gradiant). The wireless communications infrastructure and the communications software for the prototype were designed at UC3M. In addition, the UC3M researchers carried out the phases in which the different technologies developed by the associates were integrated; this integration was later validated in the Cardiology Unit of La Paz Hospital in Madrid. During this validation phase, the system was tested 24 hours a day, with five patients being monitored simultaneously. “Thanks to this experience with the hospital personnel, who were very satisfied with the platform, we found several valuable possible improvements to the system”, explain researchers Víctor Custodio, Gregorio López and José Ignacio Moreno, of UC3M’s Department of Telematic Engineering.

With slight modifications, the prototype can also be applied in other areas, such as applications involving early diagnosis of cardiac anomalies in athletes, or for telemedicine, to monitor patients in thetheir homes, thus reducing the time they must remain admitted to the hospital. The information management system stores all of the patient’s information for possible studies later, such as the analysis of how a particular patient’s level of physical activity affects the quality of the electrocardiogram. In addition, the program has a series of alarms, configured by default, which are activated when the measured parameters exceed pre-established limits, such as 38º C body temperature or 100 heartbeats per minute, for example. “All of these alarms can be modified by the doctors in order to adjust them to the specific needs of each patient; whenever any one of these alarms goes off, a message will appear on the screen and, it can also send an SMS alerting the doctor in charge or the proper hospital personnel who, at that moment, is closest to the patient in question”, the scientists point out.

The work done and the results obtained as part of this project have been presented in conferences and published in respected, international journals, such the 21st Annual IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC 2010) and the IEEE Transactions on Information Technology in Biomedicine, respectively. In this journal, the UC3M researchers published an article in which they describe the system’s architecture, its development process, the tests that have been carried out, and the validation results.

Source: Universidad Carlos III de Madrid – 19.09.2011.

Investigated and edited by:

Dr.-Ing. Christoph Konetschny, Materials Consultant, Owner of Materialsgate
The investigation and editing of this document was performed with best care and attention. For the accuracy, validity, availability and applicability of the given information, we take no liability. Please discuss the suitability concerning your specific application with the experts of the named company or organization.

You want additional material or technology investigations concerning this subject?

Materialsgate is leading in material consulting and material investigation.
Feel free to use our established consulting services

MMore on this topic

An ultrathin, electronic patch with the mechanics of skin, applied to the wrist for EMG and other measurements.
Engineers have developed a device platform that combines electronic components for sensing, medical diagnostics, communications and human-machine interfaces, all on an ultrathin skin-like patch that mounts directly onto the skin with the ease, flexibility and comfort of a temporary tattoo. Led by John A. Rogers, the Lee J. Flory-Founder professor of engineering at the University of Illinois, the researchers described their novel skin-mounted electronics in the Aug. 12 issue of the journal Science... more
A new biomaterial designed for repairing damaged human tissue doesn’t wrinkle up when it is stretched. The invention from nanoengineers at the University of California, San Diego marks a significant breakthrough in tissue engineering because it more closely mimics the properties of native human tissue.
Shaochen Chen, professor in the Department of NanoEngineering at the UC San Diego Jacobs School of Engineering, hopes future tissue patches, which are used to repair damaged heart walls, blood vessels and skin, for example, will be more compatible with native human tissue than the patches available today. His findings were published in a recent issue of the journal Advanced Functional Materials. The new biomaterial was created using a new biofabrication platform that Chen is developing under a... more
Bacterial infections really stink. And that could be the key to a fast diagnosis.
Researchers have demonstrated a quick, simple method to identify infectious bacteria by smell using a low-cost array of printed pigments as a chemical sensor. Led by University of Illinois chemistry professor Ken Suslick, the team published its results in the Journal of the American Chemical Society. Hospitals have used blood cultures as the standard for identifying blood-borne bacterial infections for more than a century. While there have been some improvements in automating the process, the overall... more
Applications for circulatory, nervous and skeletal systems
Researchers at the Georgia Institute of Technology are developing unique polymers, which change shape upon heating, to open blocked arteries, probe neurons in the brain and engineer a tougher spine. These so-called shape-memory polymers can be temporarily stretched or compressed into forms several times larger or smaller than their final shape. Then heat, light or the local chemical environment triggers a transformation into their permanent shape. “My focus has been to optimize these polymers... more
RSS
facebook
xing
twitter
linkedin

MaterialCards Weekly

Your personal and free material reminder - weekly by email

Service:
Material Charac­teri­za­tion
and Testing

You Need Advanced and Efficient Methods of Material Charac­teri­za­tion and Testing to Optimize Your Products?
Automotive Testing
Failure Analysis of Composites
Testing of Plastics and Polymers
Ceramography
Element Mapping
Characterization of Electrical and Thermal Properties
Characterization of Catalysts
Characterization of Diffusion Profiles
Characterization of Composites
Characterization of Joining Technologies
Characterization of Barrier Properties
Characterization of Coatings
Characterization of Nano-Coatings
Thermography
Failure Analysis of Products
Characterization of Materials for Medical Applications
Metallography
Fracture Mechanics
Corrosion Tests
Microstructure Analysis
Automotive Testing
Failure Analysis of Composites
Testing of Plastics and Polymers
Ceramography
Element Mapping
Characterization of Electrical and Thermal Properties
Characterization of Catalysts
Characterization of Diffusion Profiles
Characterization of Composites
Characterization of Joining Technologies
Characterization of Barrier Properties
Characterization of Coatings
Characterization of Nano-Coatings
Thermography
Failure Analysis of Products
Characterization of Materials for Medical Applications
Metallography
Fracture Mechanics
Corrosion Tests
Microstructure Analysis
Contact us – We will forward your request to one of our qualified co­operation partners in this field. All of them operate certified la­bo­ra­to­ries with modern and the most diverse equipment.

Recommended Books

Kenneth E. Gonsalves
Wiley & Sons
Erich Wintermantel, Suk-Woo Ha
Springer, Berlin