MMaterialNews vom 17.01.2012

Nano: Perfectly spherical gold nanodroplets produced with smallest-ever nanojets

KU Leuven researcher Ventsislav Valev and an international team of scientists have developed a new method for optical manipulation of matter at the nanoscale. Using ‘plasmonic hotspots’ – regions with electric current that heat up very locally – gold nanostructures can be melted and made to produce the smallest nanojets ever observed.
The tiny gold nanodroplets formed in the nanojets are perfectly spherical, which makes them interesting for applications in medicine.

The ‘backjet’ phenomenon on which the method turns can be compared to a pebble being dropped into water. Tightly focused ultrafast laser pulses carry sufficient energy to locally melt the surface of a gold film. When a laser pulse of light hits the film, a nanoscale backjet – a nanojet – of molten gold surges upward.

As the name suggests, nanojets on the surface of a homogeneous gold film are incredibly small, their size being determined by the distribution of energy in the light pulse. This distribution of energy is in turn dependent on the wavelength of light. Initially, scientists anticipated that nanojets could not be significantly smaller than the wavelength of light. In this study however, Ventsislav Valev and his colleagues show that nanojets can in fact be made much smaller with the help of ‘plasmonic hotspots’.

Plasmonic hotspots are regions on the surface of metal nanostructures where light causes very strong oscillation of the electrons. Because electron oscillations constitute an electric current and because electric currents heat up the material the same way an electric stove heats up in the kitchen, the plasmonic hotspots are extremely hot. So hot that they can melt the gold in a spot much smaller than the wavelength of light. Dr. Valev and his colleagues were successfully able to demonstrate that this tiny little pool of molten gold can give rise to the smallest nanojets ever observed.

The gold nanodroplets propelled upward by the nanojets solidify in flight, producing perfectly spherical nanoparticles. These gold nanodroplets can be collected and used for medical applications including cancer treatment. The nanoparticles can be attached to molecules and injected in the blood. Once the molecules attach to cancer cells, light can be used to heat up the gold nanodroplets and destroy the cancer cells. Currently, the gold nanoparticles used in medications are chemically synthesised. These chemically synthesised gold nanoparticles have an unavoidably granular aspect. Conversely, gold nanodroplets created by the plasmonic nanojet method detailed by Dr. Valev and his colleagues are perfectly spherical, increasing efficiency.

The study was conducted in collaboration with scientists from Germany, the United Kingdom, Bulgaria, Russia and Singapore and is published in the latest edition of the journal Advanced Materials.

Source: Katholieke Universiteit Leuven - 13.01.2012.

Recherchiert und dokumentiert von:

Dr.-Ing. Christoph Konetschny, Materialberater, Inhaber Materialsgate
Die Recherche und Aufbereitung der in diesem Dokument genannten Daten erfolgte mit größter Sorgfalt.
Für die Richtigkeit, Gültigkeit, Verfügbarkeit und Anwendbarkeit der genannten Daten übernehmen wir zu keinem Zeitpunkt die Haftung.
Bitte diskutieren Sie die Verwendung und Eignung für Ihren konkreten Anwendungsfall mit den Experten der genannten Institution.

Sie wünschen Material- und Technologierecherchen zu diesem Thema?

Materialsgate steht für hochwertige Werkstoffberatung und innovative Materialrecherchen.
Nutzen Sie unseren Beratungsservice

MMehr zu diesem Thema

Pitt researchers propose “repair-and-go” method for small-scale cracks on digital device surfaces
Like the human body, a digital device often suffers a few bruises and scratches within a lifetime. As in medicine, these injuries can be easily detected and repaired (or healed). At other times, however, a digital device may sustain hard-to-pinpoint nanoscale scratches, which can cause the device as a whole to malfunction. In a paper published today, Jan. 10, in Nature Nanotechnology, a team of researchers from the University of Pittsburgh and the University of Massachusetts Amherst (UMass) propose... mehr
When a drop falls on a lotus flower it remains on the surface without wetting it. This is due, firstly, to the chemical components of the leaves of this plant, which are hydrophobic and therefore repel water, and, secondly, to the nanostructure of the surface, which augments the repellent effect.
Taking these nanostructural properties as a starting point, researchers from the Faculty of Physics at the University of Barcelona have carried out a study – the results of which have been published in the journal Nature Materials – in which they demonstrate the physical conditions required for the controlled production of drops between the micro- and nanoscales. The study details the different physical conditions needed to destabilize a fluid and create droplets according to the wetting properties... mehr
MIT research uncovers new process relating to the way drops of water spread after striking a surface.
People living in older buildings often hear pounding noises in their plumbing or radiator pipes — it’s a well-known effect called a water hammer, which can occur when a valve is suddenly opened or closed in a pipe carrying water or steam, causing a pressure wave to travel down the pipe with enough force that it can sometimes cause the pipes to burst. Now, new research shows that a similar effect takes places on a tiny scale whenever a droplet of water strikes a surface. MIT’s Kripa Varanasi... mehr
Graphene -- A single-atom-thick sheet of carbon, like those seen in pencil marks -- offers great potential for new types of nanoscale devices, if a good way can be found to mold the material into desired shapes.
Chemists at the University of Illinois at Chicago say it's possible, reporting that graphene can become quite pliable using only a nanodroplet of water to do the job. "Up until now, it wasn't thought we could controllably fold these structures," said Petr Král, assistant professor of chemistry at UIC. "But now we know how to shape graphene by using weak forces between nanodroplets carefully positioned on graphene sheets." Král and two of his graduate students described... mehr
RSS
facebook
xing
twitter
linkedin

MaterialCards Weekly

Ihr persönlicher und kostenfreier Material-Reminder - wöchentlich per E-Mail

Service:
Material­cha­rak­teri­sierung und Werkstoffprüfung

Sie benötigen leistungsfähigste Methoden der Material­cha­rak­teri­sierung und Werk­stoff­prü­fung zur Optimierung Ihrer Produkte?
Gefüge-Analytik
Schadensanalyse von Produkten
Untersuchung von Diffusionsschichten
Element-Mapping
Automotive Testing
Bruchmechanik
Schadensanalyse von Bauteilen
Charakterisierung von Coatings
Charakterisierung von Composites
Keramographie
Medizintechnische Untersuchungen
Prüfung von Kunststoffen
Korrosionstests
Charakterisierung von Nanobeschichtungen
Thermographie
Prüfung von Werkstoffen der Elektrotechnik
Barriere-Eigenschaften
Charakterisierung von Katalysatoren
Metallographie
Charakterisierung von Fügetechnologien
Gefüge-Analytik
Schadensanalyse von Produkten
Untersuchung von Diffusionsschichten
Element-Mapping
Automotive Testing
Bruchmechanik
Schadensanalyse von Bauteilen
Charakterisierung von Coatings
Charakterisierung von Composites
Keramographie
Medizintechnische Untersuchungen
Prüfung von Kunststoffen
Korrosionstests
Charakterisierung von Nanobeschichtungen
Thermographie
Prüfung von Werkstoffen der Elektrotechnik
Barriere-Eigenschaften
Charakterisierung von Katalysatoren
Metallographie
Charakterisierung von Fügetechnologien
Kontaktieren Sie uns – Wir leiten Ihre Fragestellung an einen unserer Kooperationspartner weiter, die alle anerkannte und zertifizierte Prüf­la­bore mit modernster Ausstattung be­treiben.

Empfohlene Literatur

Zheng Cui
Springer, Berlin
Janos H. Fendler
Wiley-VCH
Motonari Adachi
Springer
Chintamani N. R. Rao
Wiley-VCH

Empfohlene MaterialCards

Materialsgate Glossar

Gold
Gold (Au, Dichte: 19,3 g/cm3, Fp: 1064 °C) ist ein goldgelb glänzendes, extrem duktiles (Blattgold) und chemisch sehr beständiges Edel- und Schwermetall. Verwendung: Wertanlage, Schmuck, Münzen, Medizintechnik, Bonddrähte, Leiterplatten, Kontaktwerkstoff, Legierungselement.
Laser
Laser steht für „Light Amplification by Stimulated Emission of Radiation“ – übersetzt: „Lichtverstärkung durch stimulierte Emission von Strahlung“. Laser sind künstliche Strahlungsquellen, deren Strahlung durch ein sehr enges Frequenzspektrum, hohe Parallelität und eine große Kohärenzlänge charakterisiert ist.