MMaterialNews vom 13.08.2012

Bionic: Gecko feet hold clues to creating bandages that stick when wet

Scientists already know that the tiny hairs on geckos’ toe pads enable them to cling, like Velcro, to vertical surfaces. Now, University of Akron researchers are unfolding clues to the reptiles’ gripping power in wet conditions in order to create a synthetic adhesive that sticks when moist or on wet surfaces.
Place a single water droplet on the sole of a gecko toe, and the pad repels the water. The anti-wetting property helps explain how geckos maneuver in rainy tropical conditions. However, saturate that same toe pad in water or drench the surface on which it climbs, and adhesion slips away, the researchers say.

As researcher Alyssa Stark, a doctoral candidate in UA’s Integrated Bioscience Program and research team leader explains, geckos don’t fall from trees during downpours in the tropics. What, then, makes them stick? The team hopes to make that discovery in order to create synthetic materials that hold their grip in wet environments, such as inside the body, for surgical procedures.

Findings by Stark, Timothy Sullivan, who received his bachelor’s degree in biology in May, and Peter Niewiarowski, UA professor of biology and integrated bioscience, are published in the August 9, 2012 issue of The Journal of Experimental Biology.

“We’re gathering many clues about how geckos interact with wet surfaces and this gives us ideas of how to design adhesives that work under water,” says Ali Dhinojwala, UA department of polymer science chair and Morton professor of polymer science. “Nature gives us a certain set of rules that point us in the right direction. They help us understand limitations and how to manipulate materials.”

Stark and her research team members tested gecko toe hair adhesion in a series of scenarios: dry toe pads on dry, misted and wet surfaces and soaked toe pads on dry, misted and wet glass. The soaked toe pads demonstrated low to no adhesion proportionately with the wetness of the surface on which they were applied and pulled. Likewise, dry toe pads lost their adhesive grip increasingly with the amount of water applied to the surface upon which they were pulled. For the experiments, geckos were pulled on a glass surface by way of a small, gentle harness placed around their midsections.

“There were anecdotes before the study that geckos can’t stick to wet glass. We now know it is a bit more complicated than that. What we expect to learn is going to be relevant to synthetics and ther capabilities to work not only on dry surfaces, but also wet and maybe, submerged ones,” Niewiarowski says. “This implies a more versatile adhesive capability.”

Gecko-inspired dry adhesive

After close study of the tiny hairs at the bottom of gecko feet that enable them to cling to surfaces, Dhinojwala and his colleagues have already developed a dry synthetic adhesive, comprised of carbon nanotubes, that outperforms nature’s variety. Now, with these new findings, Dhinojwala and his colleagues are one step closer to unfolding the secrets behind gecko toe adhesion in wetness.

The researchers plan to further study the lizards in their natural habitats and in laboratory conditions that simulate them. They’ll investigate grasping and release mechanisms, habits of the geckos in wet environments and other factors that enable the lizards to adhere to surfaces in wetness, such as to trees during rainfalls.

“Our goal is to go back and look at what they’re doing in nature and at what kind of surfaces they are walking or running on,” says Stark, noting that UA researchers have already studied such behavior of geckos in Tahiti.

Source: University of Akron - 09.08.2012.

Recherchiert und dokumentiert von:

Dr.-Ing. Christoph Konetschny, Materialberater, Inhaber Materialsgate
Die Recherche und Aufbereitung der in diesem Dokument genannten Daten erfolgte mit größter Sorgfalt.
Für die Richtigkeit, Gültigkeit, Verfügbarkeit und Anwendbarkeit der genannten Daten übernehmen wir zu keinem Zeitpunkt die Haftung.
Bitte diskutieren Sie die Verwendung und Eignung für Ihren konkreten Anwendungsfall mit den Experten der genannten Institution.

Sie wünschen Material- und Technologierecherchen zu diesem Thema?

Materialsgate steht für hochwertige Werkstoffberatung und innovative Materialrecherchen.
Nutzen Sie unseren Beratungsservice

MMehr zu diesem Thema

American researchers have created a robotic jellyfish, named Robojelly, which not only exhibits characteristics ideal to use in underwater search and rescue operations, but could, theoretically at least, never run out of energy thanks to it being fuelled by hydrogen.
Constructed from a set of smart materials, which have the ability to change shape or size as a result of a stimulus, and carbon nanotubes, Robojelly is able to mimic the natural movements of a jellyfish when placed in a water tank and is powered by chemical reactions taking place on its surface. “To our knowledge, this is the first successful powering of an underwater robot using external hydrogen as a fuel source,” said lead author of the study Yonas Tadesse. The creators of Robojelly, from... mehr
For years, biologists have been amazed by the power of gecko feet, which let these 5-ounce lizards produce an adhesive force roughly equivalent to carrying nine pounds up a wall without slipping. Now, a team of polymer scientists and a biologist at the University of Massachusetts Amherst have discovered exactly how the gecko does it, leading them to invent "Geckskin," a device that can hold 700 pounds on a smooth wall.
Doctoral candidate Michael Bartlett in Alfred Crosby’s polymer science and engineering lab at UMass Amherst is the lead author of their article describing the discovery in the current online issue of Advanced Materials. The group includes biologist Duncan Irschick, a functional morphologist who has studied the gecko’s climbing and clinging abilities for over 20 years. Geckos are equally at home on vertical, slanted, even backward-tilting surfaces. "Amazingly, gecko feet can be applied... mehr
Weil die Härchen sich immer feiner verzweigen, gehen Geckos auch auf Raufaser die Wand hoch. Am INM - Leibniz-Institut für Neue Materialien bilden die Wissenschaftler nun solche „hierarchischen“ Strukturen künstlich nach. Sie wollen damit das Haften speziell auf rauen Oberflächen weiter untersuchen.
Im Wesentlichen ist das Haftprinzip erkannt. Es beruht darauf, dass viele dünne Härchen besser haften als ein dickes Haar. Jedoch spielt der Untergrund eine entscheidende Rolle: Bei seinen Streifzügen braucht der Gecko mal die gröberen und mal die feineren Härchen, um gut zu haften und sich auch schnell wieder abzulösen. „Stellen Sie sich einen Besen vor, bei dem sich die Borsten immer feiner und dünner nach unten verzweigen“ erklärt Tobias Kraus, Leiter der Juniorforschungsgruppe... mehr
Tree frogs have specially adapted self-cleaning feet which could have practical applications for the medical industry.
"Tree frog feet may provide a design for self-cleaning sticky surfaces, which could be useful for a wide range of products especially in contaminating environments - medical bandages, tyre performance, and even long lasting adhesives," says researcher, Niall Crawford at the University of Glasgow who will be presenting this work at the Society for Experimental Biology Annual Conference in Glasgow on 3rd of July, 2011. Tree frogs have sticky pads on their toes that they use to cling on... mehr
RSS
facebook
xing
twitter
linkedin

MaterialCards Weekly

Ihr persönlicher und kostenfreier Material-Reminder - wöchentlich per E-Mail

Service:
Material­cha­rak­teri­sierung und Werkstoffprüfung

Sie benötigen leistungsfähigste Methoden der Material­cha­rak­teri­sierung und Werk­stoff­prü­fung zur Optimierung Ihrer Produkte?
Metallographie
Barriere-Eigenschaften
Prüfung von Kunststoffen
Thermographie
Charakterisierung von Katalysatoren
Automotive Testing
Medizintechnische Untersuchungen
Korrosionstests
Charakterisierung von Composites
Bruchmechanik
Gefüge-Analytik
Charakterisierung von Fügetechnologien
Untersuchung von Diffusionsschichten
Charakterisierung von Nanobeschichtungen
Schadensanalyse von Produkten
Schadensanalyse von Bauteilen
Keramographie
Charakterisierung von Coatings
Element-Mapping
Prüfung von Werkstoffen der Elektrotechnik
Metallographie
Barriere-Eigenschaften
Prüfung von Kunststoffen
Thermographie
Charakterisierung von Katalysatoren
Automotive Testing
Medizintechnische Untersuchungen
Korrosionstests
Charakterisierung von Composites
Bruchmechanik
Gefüge-Analytik
Charakterisierung von Fügetechnologien
Untersuchung von Diffusionsschichten
Charakterisierung von Nanobeschichtungen
Schadensanalyse von Produkten
Schadensanalyse von Bauteilen
Keramographie
Charakterisierung von Coatings
Element-Mapping
Prüfung von Werkstoffen der Elektrotechnik
Kontaktieren Sie uns – Wir leiten Ihre Fragestellung an einen unserer Kooperationspartner weiter, die alle anerkannte und zertifizierte Prüf­la­bore mit modernster Ausstattung be­treiben.

Empfohlene Literatur

Antonia B. Kesel
Fischer
Torsten Rossmann, Cameron Tropea
Springer, Berlin
Nils Bramberg, Hrsg.
FastBook Publishing

Empfohlene MaterialCards

Materialsgate Glossar

Carbon
Umgangssprachlicher Begriff zur Kennzeichnung von Materialien und Werkstoffen auf der Basis von kohlenstofffaserverstärkten Kunststoffen (CFK).
Sole
Als Sole wird im Allgemeinen eine wässrige Salzlösung bezeichnet.